FLEXIBLE HOSES FLEXIBLE HOSES CHARACTERISTICS TGA Crush-resistant flexible hose for extraction of motor vehicle and industrial vehicle exhaust gas Equipments Components with temperatures up to 180°C peaking at 200°C (max.). The widespread use of this hose on hose reels, suspended ducts, and under floor systems, provides a response to the majority of installations thanks to the lightweight structure in rubberised fabric coupled with an external polyamide coil and abrasion-resistant rubber covering. TGE Crush-resistant rubber hose for extraction of motor vehicle and industrial vehicles exhaust gas with temperatures up to 180°C. Use for under floor extraction installations with our PFA system (see specific catalogue) is assured also in the most severe applications, thanks to the heavy gauge rubber construction with fabric reinforcement to provide greater strength and flexibility. Flexible fiberglass fabric silicone impregnated hose for extraction of gas and fumes at temperatures of up to 300°C. Recommended for wall or ceiling-mounted systems (not produced in crush-resistant version); can be joined to other less temperature resistant hoses in the vicinity of outlets for initial heat dissipation. The lightweight and highly flexible structure, with harmonic steel coil reinforcement; stitched externally with fibreglass twine. T40 Flexible fibreglass fabric hose for extraction of motor vehicle, industrial and military vehicles T40M exhaust gas with temperatures up to 400°C. T40S The use indicated for wall or ceiling-mounted installations (the hose is not produced in a crushresistant version) satisfies the requirements of high temperature applications thanks to the special silicone fibreglass fabric bonded to a steel coil with outer covering to increase abrasion resistance and thermal insulation. Flexible hose in blended polyester fabric with double PVC coating for extraction of gas and fumes at temperatures of up to 90°C. The use indicated for wall or ceiling-mounted installations (not produced in crush-resistant version) can be used for extraction of fumes or exhaust gas, including vehicle exhaust, provided the gas temperature is low and the hose is not directly in contact with hot fumes. The lightweight and highly flexible coil structure with harmonic steel coil incorporated between the double layers of fabric is designed to withstand abrasion and corrosion. Flexible hose in clear polyethylene for extraction of acid vapor, abrasive powder, heavily dustladen air mixed with particulate of various sizes, temperature of up to 100°C. Can be joined to modified hose reels for the conveyance of dust in cleaning or general extraction applications up to 150 mm diameter (not produced in crush-resistant version). Thanks to the exceptional flexibility and mechanical resistance to cuts and abrasions, this article replaces commercial air conveyance hoses for particularly harsh applications.

CRUSH RESISTANT FLEXIBLE HOSE TGA TGE T36 Q TGA INTERNAL DIAMETER THEORETICAL WEIGHT RADIUS OF BENDS

FLEXIBLE HOSES FLEXIBLE HOSES T19 T20 T40 INTERNAL DIAMETER COIL WEIGHT WIRE DIAMETER AVERAGE WEIGHT INTERNAL DIAMETER COIL WEIGHT WIRE DIAMETER AVERAGE WEIGHT Available lengths: 10 Equipmentstoup to mm diameter) (20 m up 200 Components Other diameters: on request. Colour: Black Available lengths: up to 10 (20 m up to 200 mm diameter). Other diameters: on request. Colour: transparent with copper coated steel coil On request: hoses with double coating. INTERNAL DIAMETER Colour: grey COIL WEIGHT Ø mm Available lengths: up to 10 m and provided with end sleeves on request. N.B. The hoses must be...

ACCESSOIRIES FOR FLEXIBLE HOSES UNIVERSAL KIT HOSE RETAINER Quick release coupling for rubber intake, in impact proof and temperature resistant Plastic. The kit includes a semi-coupling for intake, a semicoupling for hose complete with spring pressers and 2 fixing clamps. Uk for connection to flexible hose - uk for connection to intake Ø AVAILABLE 75, 100, 125, 150 mm. Duct support system, fitting for suspension of ø 75,100, 125 and 150mm hose on slide bearing. Composite plastic quick-coupling hose retainer available in Ø 75, 100, 125 and 150 mm. HOSE CLAMPS Galvanised steel hose clamps to DIN...