Catalog excerpts
INDUSTRY Technical data sheet DOWN-DRAUGHT BENCHES BAF Professional down-draught benches with filtration for heavy loads The down-draught bench, complete with filter system is normally used for the extraction and elimination of fumes and low volume particulate of small granularity from processes such as: welding, finishing and polishing in heavy industry but, if proper precautions are taken, it may be also be used in marble and chemical processing. The dimensions of the bench, the extraction work surface and the removable perimeter guards are sized to allow suitable collection speed while protecting the operator from the risk of inhalation, limiting the work area to prevent dispersion of the pollutant into the environment. The structure manufactured from welded and painted thick sheet metal allows heavy-duty use and flexibility, even for occasional processes of manual plasma cutting. The down-draught bench therefore consists of: - Painted steel load bearing structure of a suitable thickness. - Sturdy baffled extraction surface is replaceable, according to the work to be carried out, by means of fitted guides. - Front and side extractor fan panels, removable by means of fitted hinges. - Internal mechanical pre-filter section consisting of an anti-spark, cylindrical steel mesh filter with filtration carried out by means of high efficiency, large surface area synthetic pocket filters; this guarantees significant accumulation of small granular particulates. - Lower sealed particulate containment drawers.
Open the catalog to page 1TECHNICAL DATA The performance data was measured using the appropriate instruments in our laboratories. - Air flow and loss of pressure are detected in situations of normal use and in consideration of the parameters required by current legislation and the available technology. Inlet speed depending on the models, from 4 to 8 m/s. Internal floating speed from 17 to 25 m/s. MOD. HEAD LOSS OUTPUT DIAMETER FILTRATION EFFICIENCY TOTAL WEIGHT
Open the catalog to page 2SPARE PARTS WORK SURFACE Extraction work surface in steel sheet metal rim painted in grey RAL 7032 with maximum permitted load of 350 Kg/m². Work surface 10 Work surface 15 Work surface 20 Work surface 30 ACCESSORIES Backward flat bladed extraction system, suitably sound-proofed in a soundproof box with connection to the left or right side of the bench. The unit may be supplied with a single phase 230V 50-60 Hz power supply. MAX. EXTR MOTOR ACTION RPM FAN POWER CAPACITY RESIDUAL TOTAL PRESSURE WEIGHT
Open the catalog to page 3Plenum for connecting the extraction arm to the side of the BA bench, in painted steel sheet, with the option of interchanging the surface ELECTRICAL PROTECTION PANELS FOR EXTRACTION FANS Electrical panel for extraction fan start-up and circuit-breaker protection for extraction fans Powered by TCPDF (www.tcpdf.org)
Open the catalog to page 4All AERSERVICE EQUIPMENTS SRL catalogs and technical brochures
-
ARMOTECH-INDUSTRY
3 Pages
-
ARMOFLEX-INDUSTRY
3 Pages
-
BAZ-INDUSTRY
2 Pages
-
BA-INDUSTRY
4 Pages
-
EC
3 Pages
-
CA
3 Pages
-
ELEMAX
3 Pages
-
ELE S
2 Pages
-
ELE F
3 Pages
-
CATALOGO WELDING
50 Pages
-
AUTOMOTIVE
10 Pages
-
AER
2 Pages
-
IBF
2 Pages
-
Flexible Hoses
4 Pages
-
AER
6 Pages
-
ECO
6 Pages
-
FACE
6 Pages
-
ICAF - ICAFTH
6 Pages
-
FACT - FACTH
6 Pages
-
FACILE
6 Pages
-
MF SERIES
10 Pages
-
SUSPENDED EQUITMENTS ICAP - ECOP
16 Pages
-
ARTICULATED ARM IBS SERIES
36 Pages