MM

MM

MM

Product catalog summary
Overview
This document outlines the technical specifications and operational guidelines for a magnetic mixer system used across industries such as pharmaceuticals, biotechnology, cosmetics, chemicals, and food processing. The system is engineered for efficient mixing, homogenizing, emulsifying, dissolving, and suspending processes.

Specifications
  • Materials: The wetted parts are constructed from stainless steel AISI 316L, with options for tungsten carbide, silicon carbide, and zirconium bearings.
  • Motor Data: The motor operates at 230/400V AC–50Hz and 460/480V AC–60Hz, with a protection index of IP 55, certified by CE/cCSAus, IEC, CEI/UNEL.
  • Design Parameters: The system supports a pressure range from -1 to +10 bar(g) and a temperature range from -80 to +200°C, compliant with PED Directive 97/23/EC Category IV.
  • ATEX Compliance: The system is available for hazardous environments in accordance with European Directive 94/9/CE ATEX.

Operational Features
  • Impeller Design: The impeller features a ring of special magnets encapsulated in a 316L stainless steel housing, offering excellent axial pumping flow and a low shear rate.
  • Speed Range: The speed is adjustable from 500 to 3000 rpm using an inverter, suitable for various vessel sizes and impeller-head volumes.
  • Mixing Capacities: The system can handle capacities ranging from 10 to 9,000 liters, depending on the model, with power ratings from 250 watts to 7.5 kW.

Optional Accessories
  • Flush Tank Washing Valves: These valves are designed for aseptic applications, enhancing hygiene by ensuring full drainability and reducing cleaning agent consumption by 50% compared to conventional methods.
  • Sampling and Check Valves: The system includes aseptic sampling valves, sanitary sampling bottles, and high purity ball valves for various applications.

Warnings and Recommendations
  • The assembled mixer may have different design temperature and pressure limits, determined by the weakest component.
  • Ensure full traceability with individually marked weld plates.
See more

Catalog excerpts

MM-2

Description Designed complying with FDA rules for pharmaceutical and biotechnology industries. The most obvious advantage is that enables the total integrity of the tank. The vessel shell is not penetrated and there are no mechanical seals or stuffing boxes; this minimized cross-contamination risk and also prevent toxic or high value media from leaking out of the vessel and thereby challenge the sterility of the vessel and its contents. Suitable for viscosities up to 800 cps offers great flexibility. Bottom mounting also leaves the top of the vessel clear for easy vessel access. Principle of...

 Open the catalog to page 2
MM-3

Dismounting system for magnetic coupling to take off the impeller without any magnetic attraction and without remove the motor. Dedicated for heavy, biggest size from AMT-20 to AMT-64. Vigorous/Gentle Power rating Diameter Diameter / Thikness The mixing capacities above are based on aqueous like products with a density of 1.000 Kg/m3 and a viscosity of 1cp. Typical applications for "Gentle mixing" are where solid are held in suspension or where powders easily dissolve into the liquid. Typical applications for "Vigorous mixing" are where a vortex is required for blending of powders into...

 Open the catalog to page 3
MM-4

AMT-MAGNETIC MIXER

 Open the catalog to page 4
MM-5

AMO Performance The geometry of the impeller allows an excellent axial pumping flow and very low shear rate for different applications, especially for Homogenizing that mean to transport one phase or ingredient (liquid, solid, gas) into a main continuous phase (typically liquid), with which it would normally be insoluble; EMULSIFYING: the process of dispersing one liquid into a second insoluble liquid, such as oil dispersed in water. Producing a small droplet size in necessary in order to archive a stable emulsion. DISSOLVING or down sizing applications, dissolving in dispersing an insoluble...

 Open the catalog to page 5
MM-6

ASEPTIC SAMPLING VALVES SANITARY SAMPLING VALVES SANITARY SAMPLING BOTTLE TANK BOTTOM ASEPTIC VALVE SPRING CHECK VALVES HIGH PURITY BALL VALVES BUTTERFLY VALVES SIGH GLASS-FLOW INDICATOR CLAMP FITTINGS TANK CONNECTIONS SILICONE HOSE & FITTINGS MAGNETIC MIXER DIAPHRAGM VALVES WASHING DEVICES AERRE INOX s.r.l. Via Gerola, 4 I-26010 Fiesco (Cremona) Tel. +39 0374 370 828 Fax +39 0374 370 833 www.aerreinox.it Get the information you need and more at [email protected]

 Open the catalog to page 6
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.