Clamp Fittings 2016

Product catalog summary

Product Specifications: Stainless steel fittings comply with ASME BPE standards and are made from AISI 316L stainless steel. They are available in sizes from ½” to 4” as standard, with larger sizes available upon request. The fittings are designed for high-quality orbital welding, with sulfur content controlled between 0.005% and 0.017% to ensure weld quality.

Material and Compliance: The fittings meet FDA criteria, and some compounds are certified by USDA, cGMP, and USP Class VI. They are non-toxic and absorbent-free, complying with U.S. Pharmacopoeia Class VI and USDA standards.

Dimensions and Tolerances: Dimensions follow ASTM A270, with tolerances as per ASTM A269 or ASME BPE Part DT. A detailed tolerance table is provided for various sizes, ensuring precision in manufacturing.

Surface Finish: Internal surfaces comply with ASME BPE standards, with mechanical polishing as per ASME BPE Part SF. External surfaces are finished with scotchbrite. Surface finish readings (Ra) are taken across four cross sections, ensuring no single reading exceeds the maximum Ra.

Marking and Documentation: Each fitting is marked with a heat number, size, material grade, and brand name. Material Test Reports (MTR) are provided with the fittings.

Performance Properties: Various gasket materials are evaluated for properties like tensile strength, electrical properties, weather resistance, and more. Silicone-X is not recommended for use with glycerin.

Specialty Items: For fittings not listed, contact Aerre Inox for more information.

Contact Information: Aerre Inox s.r.l., Via Gerola, 4, I-26010 Fiesco (Cremona), Tel. +39 0374 370 828, Fax +39 0374 370 833, Website: www.aerreinox.it, Email: [email protected]

Catalog excerpts

HIGH QUALITY SANITARY FITTINGS for the success of your pharmaceutical process PRODUCT Stainless Steel fittings comply with ASME BPE standards. All clamp gaskets compounds meet the criteria of the FDA, and some compound formulations have also been certified and accepted by the USDA, cGMP Sanitary Standard, and USP Class VI certifications. MATERIAL Fittings are fabricated in AISI 316L Stainless Steel (EN 1.4404 - 1.4435). Sulfur controlled to 0,005 @ 0,017% on all weld ends, allowing for consistent and high quality orbital welding process. Sulfur has the biggest impact on weld quality. SIZES Stainless...

Open the catalog to page 2

Final tolerances for mechanically polished fittings and process components GENERAL NOTE: tolera nces on E end-to-end, center-to-end: 1,27 mm. The length of the control portion C is fixed for all size at 19 mm. ( SURFACE FINISH TABLE SF2 Ra readings for fittings INSIDE SURFACE Ra Maximum pm Surface treatment ASME BPE Surface designation Guarnizioni prodotte in quattro versioni base in una varieta di materiali atossici, non igroscopici. Gaskets are produced in four basic designs in a variety of materials that are non-toxic, absorbent free. ■ Meet U.S. Pharmacopoeia Class VI ■ Comply with title...

Open the catalog to page 3