Catalog excerpts
0 AEROTECH A New Era in Galvo Performance
Open the catalog to page 1When Precision Matters Aerotech's AGV scanners are designed with high-resolution feedback devices that are thermally stable and exhibit virtually no gain or offset drift. Control electronics are completely separated from the scanner to provide the highest levels of thermal stability. The Nmark® GCL uses advanced interpolation electronics to provide up to 26-bits of effective resolution. Advanced calibration techniques enable accuracies at the image plane to the single-digit micrometer level. Infinite Field Of View (IFOV) It is common practice to use servo axes in conjunction with scanners...
Open the catalog to page 2The AGV and GCL combine to form a high-throughput solution in applications like via drilling. The image above shows the AGV/GCL performing multiple 30 pm diameter circles at a rate of 3000 times per second, with less than 1.5 pm of tracking error. Continued Excellence in Combined Scanner/Servo Motion Aerotech's Nmark GCL closed-loop scanner drive for the Automation 3200 motion platform allows for direct conjoined control of galvo scanner and servo motion for micromachining and marking of parts of unlimited size and complexity. The 100% digital scanner control removes the need for...
Open the catalog to page 3• Closed-loop, two-axis servo drive for Aerotech's AGV series scanners • Infinite Field Of View (IFOV) seamlessly combines AGV and servo motion to expand the scanner work area • Full servo state control with "zero-tracking error” eliminates speed-related part distortion such as necking on circles and rounding of corners • Position-based laser firing (PSO) with windowing maintains consistent spot spacing over a wide range of operating speeds • External clock input for synchronization with mode-locked lasers • Highest accuracy scanner available attains singledigit, micron-level accuracy over...
Open the catalog to page 4All Aerotech catalogs and technical brochures
-
Automation1 iXL2e
9 Pages
-
Automation1 iXL5e
7 Pages
-
AGS1000 Series
4 Pages
-
BLMX Series
4 Pages
-
ABL1000 Series
7 Pages
-
AGV-HP(O) Two-Axis Galvo Scanner
66 Pages
-
AUTOMATION1
3 Pages
-
Cartesius
7 Pages
-
Aerotech Linear Motors
24 Pages
-
Infinite Field of View
4 Pages
-
Cartesian Robots
12 Pages
-
Nanopositioning
6 Pages
-
Surface Measurement Motion
12 Pages
-
System Integrator Program
4 Pages
-
Certified Integrator
12 Pages
-
S-Series Motor Hardware
44 Pages
-
BM/BMS Brushless Motor Hardware
46 Pages
-
Flat Linear Motor Hardware
48 Pages
-
U Channel Linear Motors Hardware
56 Pages
-
Linear Motors
20 Pages
-
AGS15000 Gantry System
7 Pages
-
ACT140DL Linear Actuator
11 Pages
-
ARMS-150 Rotary Motion Simulator
13 Pages
-
AOM130 Optical Mount
3 Pages
-
APT Pan and Tilt Mount
3 Pages
-
AOM130M Gimbal
4 Pages
-
AMG Gimbal
9 Pages
-
ARMS-200 Rotary Motion Simulator
13 Pages
-
ABG10000 Gantry
4 Pages
-
AGS10000 Gantry System
5 Pages
-
AGS1500 Gantry System
5 Pages
-
AOM110 Optical Mount
4 Pages
-
ANT-20G Goniometers
8 Pages
-
AOM360D Gimbal
8 Pages
-
AGC Goniometer Series
8 Pages
-
ARS301
2 Pages
-
AVS, AVSI100
7 Pages
-
ANT95-XY ULTRA
6 Pages
-
ABRT
6 Pages
-
ABL1500
6 Pages
-
AMG LP
6 Pages
-
A3200
6 Pages
-
ANT-20G
8 Pages
-
ABL1000
5 Pages
Archived catalogs
-
Integrated Automation Solutions
84 Pages
-
Cartesian Robots
12 Pages
-
Linear Motors
36 Pages
-
Nanopositioners Catalog
128 Pages