Computer Controlled Robotic Plotter-Cutter Laser Speed ~ Laser Performance With a Hot-Knife Price Tag The Aeronaut Elektron Laser Z is a compact high-performance and low-cost laser cutter intended for cutting and edge sealing lightweight textiles such as ripstop Nylon and light Dacrons. The Elektron Laser Z is a heavy duty production machine capable of cutting in excess of 1 metre per second. This laser cutter has been designed for industries such as paragliding manufacture, kite and sail making, where high cutting speeds and edge sealing are required on light fabrics. Since the laser power needed to cut these materials at speed is relatively low, Aeronaut have fitted a lightweight all-metal sealed laser to the rigid, easy to accelerate Elektron chassis. The result is a breakthrough in performance and price. Since there is no contact with the fabric when laser cutting, plotting is fast and very reliable. Cut patterns release cleanly. Nesting margins can be less than a millimetre. The result is big cost savings in time and fabric. Laser power can be accurately controlled for marking, perforating or kiss cutting. The Elektron Laser Z can be supplied with air or water cooled lasers and is fitted with a marker pen holder and efficient fume extraction. The metal sealed laser has a very low running cost with over 35,000 hours before re-gassing. The Elektron Laser Z is an industrial revolution… Small size, clean design, rational engineering, the best priceperformance ratio. And the best price tag in the industry. • Very High Cut Speeds • High reliability • Variable output power • Simple setup • Very low running cost • Very low maintenance • All-metal laser • Water or Air cooled • Cut and seal • Perforate and mark • Lightweight rigid chassis • High torque motors • Very simple construction • Universal Pen holder • Accurate, smooth cutting • Affordable purchase price • Easy servicing • Compatible with most software & computers • Widely available spares • Rigid guide extrusions • Low-backlash Cat drive

Elektron Laser Z Plotter-Cutter Product Specifications Features • Water & Air cooled CO2 Lasers • Quiet, efficient fume extraction • High torque rare earth motors standard. • Micrometer adjustable focus • Low cost marker pens • No inert gas required • Full safety interlocks • Available with and without vacuum table • 25mm wide drive belts throughout. • Quality Robotic cables running in energy chain • Ultra low maintenance • Cutting widths up to 3m (118”) • Cutting lengths up to 25m (82‘) Advantages • Simple rugged construction • Simple to use and cheap to maintain • Quiet, high speed operation...