Ctrm.jjiE.ttzi-- Ekjntr-triLiz.tJ. Tintemi,citez,cl CLLHC The Aeronaut Ink Jet Pen is a specialised marking system which can be fitted to Aeronaut plotters for off-contact marking of materials where conventional pen marking is If you need to mark coarse, rough, open weave, highly absorb- ent or furry materials where a conventional pen marker will get caught in the fabric or markings will be invisible, the The Aeronaut Ink Jet Pen sits at a distance of 5-20mms above fabric and has a marking speed of well over a metre a second on all materials, quickly and effectively solving marking prob- lems on difficult materials. The ink jet Pen is synchronised with the speed of the plotter so a series of ink dots can be made with a line quality which can be adjusted in software from a dense solid line to a widely spaced dotted line with highly visible dot size of approx. • Zero fabric contact • Highly visible marking • Very high marking speeds • Wide range of line types • Marks abrasive fabric • Marks coarse fabric • Marks open weave fabric • Marks furry fabric • Marks absorbent fabric • Wide range of ink types from third party suppliers A good range of ink types is available from industry suppliers in most countries in nomai and UV-visible types with a wide range of drying times. TtcntrnnuT Tt urtrmnTitrn ~ 4-6 TEPKO ROAD TERREY HILLS NSW 2084 AUSTRALIA PHONE (61-2) 9450 0800. FAX (61-2) 9450 0477 www. AERONAUT.ORG EMAIL [email protected]