Economically move loads from 1 to 14 tons AeroGo Aero-Pallets are designed to operate for load capacities from 1-14 tons. They are ideal for any application moving heavy, bulky loads. Because their travel path can change in every direction, Aero-Pallets are especially popular in applications such as lean manufacturing, product testing, manufacturing and component assembly. Aero-Pallets can work alongside or replace forklifts, cranes and conveyors at a fraction of the cost. AeroPallets are constructed of aluminum decks over four or more air caster units. Guide wheels provide optimum load control. Optional handles, chocks, throttle controls, and no-load wheels are available. Advantages to Moving Heavy Loads with Air Caster Technology: Ideal for Manufacturing. The omnidirectional, self-loading Aero-Pallet does not require any permanent floor fixtures or rails. The travel path can change as necessary. Components can be floated to the side of an assembly line without slowing production. • Easy omnidirectional multipositioning Near Zero Vibrations or Emissions. Quiet operation with zero emissions and vibration-less movement. A proven effective handling method for moving calibrated equipment. Aero-Pallet with optional heavy duty U-handle • Economical and reliable • Flexible for a variety of applications • Ergonomic – reduces lift hazards • Utilizes existing shop air • Aero-Casters meet ASME specifications Four or six Aero-Casters Automatic flow control valves One pressure regulator with gauge One on/off ball valve 1170 Andover Park West Tukwila, WA 98188-3909 • Low friction – no floor damage • Precise positioning without floor damage compared to traditional material handling equipment methods Each Aero-Pallet Includes: • • • •

Deck Size Area* (sq ft) Fixed Mount Model Number Standard Specifications Model Number Metric Specifications Deck Size Area* (m2) Fixed Mount *Manifold at air inlet ends add 1.5-inch (.38mm) to overall length. Manifold cannot support the load weight and must extend beyond the load. **NOTE ON ESTIMATED AIR FLOW: Air flow listed on this page is an estimate of the air flow at a given load, and a good operating surface. Always multiply this air flow data times 1.75 (1.5 for Gapmaster) to provide a safety factor or when calculating air compressor requirements. 1170 Andover Park West Tukwila, WA 98188-3909...