Wireline.XY
4Pages

Laser Systems WIRELINE.XY and ovality Laser System for on-line diameter measurement of drawn wire. Wireline.XY is a Laser Measuring System specially designed to monitor the diameter and ovality of steel and copper wires The system has been designed to work in the Wire Industry, to check the wire diameter during drawing, with high accuracy and reliability, as the measurement is unaffected by wire vibration and speed. Thanks to a new and patented dust protective bracket, it is possible to install the gauge on dry drawing drawing benches, where soap and iron dust can strongly affect the measuring accuracy and blind the sensor in a very short period of time.

The Wireline.XY system is based on an Xactum laser gauge, installed after the nishing die, to measure the external diameter of the product. By using a dual axis gauge and checking the diameter along two crossed directions, it is possible to compute the average diameter of ovalized products, when the simple measurement along one axis would not be accurate enough to perform efcient control. It is a well known fact that a major obstacle in expanding online diameter measurement practice in the Wire Industry is the dust sensitivity of all optical instruments, which jeopardizes applications on...

The additional weight measuring module (Option 1) features the following functions: The contactless gauging technology makes possible online application: the 100% checking enables the production of wire diameter without faults, eliminating any risk of rejects or complaints. • It computes and displays the length and the weight of the drawn wire. • Stop and slow-down signals at the pre-set weight or length. • Printing of the length and weight of each spool. • Programmable operational modes (start/stop/reset) to facilitate the interfacing with a coiling machine. Labor cost can be greatly...

WIRELINE.XY13/A Gauge Model (mm) Measuring Field (mm) Measurable Diameters (μm) Resolution (Selectable) (μm) Linearity (Centered Product) (3) (μm) Linearity (Full Range) (6) (mm) Linearity (Reduced Field) (7) (μm) Repeatability (T=1s, ±2 ) (μm) Single Shot Repeatability (±2 ) (mm) Beam Spot Size (s,l) (9) (Hz) Scanning Frequency (m/s) Scanning Speed (μm/m°C) Gauge Thermal Coefficient (10) Laser Source Dimensions Weight VLD (Visible Laser Diode); (mm) (kg) (1) For Ø 0.3 mm; for smaller diameters the field is proportionally reduced up to 4x4 mm for Ø 0.1 mm. (2) For Ø 0.3 mm; or smaller...