Table-Gauge.X
4Pages

Laser Systems Use the Xactum Intelligent Laser Gauges as bench-top micrometers, in the Table-Gauge configuration: with no other instrument can you measure diameters so quickly, so accurately and so easily. It’s the ideal instrument to check pins, ground or other turned parts. No matter what the operators’ skill level! Ultra-accurate and perfectly reproducible measurements thanks to Aeroel’s outstanding Laser Technology offered at affordable conditions.

The Table-Gauge.X The XLS gauges are programmed with a dedicated software and are completed with a display unit, a remote control, fixturing to hold the part and a base-plate for bench-top use: using this “Table-Gauge” assembly you can, in a few seconds, check the diameter, roundness and the concentricity of ground or turned parts, to an accuracy that before only could be obtained in a metrology room, by using much more expensive equipment and specialized personnel. Exclusive Aeroel features • The scanning motor based on the Fluid Dynamic Bearing technology, without ball bearing works...

Measurement examples Diameter and roundness: rotate the part by 180° and measure the diameter, display the average diameter and the value of the Diameter Range = Dmax-Dmin. Run-out: measure of the center position during a 180° rotation, with the part held between centers, and display the value of the Center Position Range = Cmax-Cmin. You will get the run out of the measured section referred to the center axis. Sphere er Groove diameter: move the part along its axis and measure the diameter, display the Maximum or Minimum Diameter value. Display and remote control Multicolor LED display to...

BASIC SYSTEM OPTIONAL BASE AND SLIDE DISPLAY AND ALARMS MODULE DM-100 Main Display LED 6 digits, 7 segments multicolour Sub Display LED 2 digit 6 Warning lights for the Status of the Inputs and the Outputs 4 Outputs protected PNP, Imax: 100 mA 2 Inputs PNP, Ityp.: 15 mA Dimensions: 97 x 49 x 158 mm Weight: 0.5 kg Power supply: 24 VDC 150 mA I.R. REMOTE CONTROL Size: 140 x 55 x 25 mm Weight: 67 g (without batteries) Power supply: 2 AAA 1.5 V batteries Available models TABLE-GAUGE.X40 Gauge Model Beam height (mm) Measurement range (mm) This product conforms to the following standards: 21 CFR...