Super-Meclab.X
4Pages

Laser Systems SUPER-MECLAB+.X Bench-top Laser Micrometer The SUPER-MECLAB+.X Bench Top Laser Micrometer is a high precision instrument for ultra-high accuracy diameter measurements. It is ideal for the off-line, manual measurements of a wide range of ground or turned parts with different shapes and sizes, such as: • electric motor shafts • ground or turned parts • gage pins • piston pins • hydraulic components It measures diameter and ovality, run-out, edge position, taper, grooves or peak diameter, gap between parts and more.

System composition The basic system (S version) consists of: • XLS40 or XLS80 Xactum Intelligent Laser Sensor • Flat granite baseplate with precision linear slide (400, 640 or 820 mm long) • Embedded Aeroel PC with 10.4” LCD monitor • Super-Meclab.X software pre-installed in the system • NO-VAR option: compensation of measuring drift due to changing room temperature • Power supplies, connecting cables, keyboard and mouse • Calibration report (available on request) • Ready for external monitor (not supplied) The SR version includes a motor driven device to rotate the part, with friction...

Gauging flexibility Multiple dimensions can be checked The user can choose among several different types of measurements, each one corresponding to a pre-set combination of light/shadow segments. Diameters, edge positions, center position, gap between two parts, etc. can be measured. Multiple dimensions can also be measured at the same time (i.e. diameter and center position). The parts being checked can be either opaque or transparent (glass logic) and can be also round or sharp edged (i.e. fluted tools). The Super-Meclab.X Software The Super-Meclab.X software has been designed to be...

All dimensions are in mm - Removable handles Note Measuring Field Measurable Diameters Resolution (Selectable) Linearity (Centred Product) Linearity (in the Measuring Plane) Single Shot Repeatability (±2 ) Beam Spot Size (s,l) (4) Side Dither of the Scanning Plane Scanning Frequency Scanning Speed Gauge Thermal Coefficient (5) VLD (Visible Laser Diode); Laser Source Power Supply Operating Temperature Range For each model also is available the /A version with a larger spot width: 2 mm for XLS40/*/A and 3.5 mm for XLS80/*/A. (1) For Ø 25 mm. For Ø 25 mm the linearity is ± 0.75 μm. The value...