Super-Meclab.T
4Pages

Laser Systems SUPER-MECLAB+.T40 Bench-top Laser Micrometer The SUPER-MECLAB+.T40 Bench Top Laser Micrometer is a high precision instrument for ultra-high accuracy diameter measurements of uted part, with odd or even utes. It is ideal for the off-line checking of • drill bits • end mills • cutting tools • toothed pulleys • small gears In addition it can be also used to check the diameter, ovality and the straightness of • hard metal blanks • ground pins or cylinders

System Composition The basic system consists of: • XLS40/1500/B Xactum Intelligent Laser Sensor • Flat granite baseplate • Precision linear stage, manually driven, with magnetic digital scale • Embedded Aeroel PC with 10.4” LCD monitor • Super-Meclab.T software pre-installed in the system • Fixture for the part, with a pair of V blocks and a stopper • Motor driven device to rotate the part, with driving wheel and its driver for the stepper motor • NO-VAR option: compensation of measuring drift due to changing room temperature • Power supplies, connecting cables, keyboard and mouse •...

Measuring Mode Mode 1: each ute/cutting edge is measured separately and the processor computes the effective diameter of the circle determined by the cutting edge during the rotation. The Super-Meclab.T software has been designed to be extremely user friendly and very exible. Automatic seeking of the “zero point” A special guided procedure is available to reset the position reading at the part starting point. The following dimensions are computed and displayed • • • • Maximum diameter or “effective cutting diameter“ Minimum diameter Diameter Range (Ø max – Ø min) Run-out Quick tolerance...

All dimensions are in mm - Removable handles Xactum XLS40/1500/B Laser Micrometer Measurable Diameters Linearity (Centred Product) Linearity (in the Measuring Plane) Single Shot Repeatability (±2 ) Beam Spot Size (s,l) Scanning Frequency Gauge Thermal Coefficient VLD (Visible Laser Diode); Laser Source This product conforms to the following standards: 21 CFR 1040.10 (USA) • CEI EN-60825-1:2007 (EU) Specifications subject to change without notice. For additional details and complete specifications please see the gauge data sheet. FIXTURE Precision linear slide on a at granite base: stainless...