Meclab.X
4Pages

Laser Systems MECLAB.X Bench-top Laser Micrometer The MECLAB.X Bench Top Laser Micrometer is a high precision instrument for ultra-high accuracy diameter measurements, ideal for the off-line, manual measurement of a wide range of ground or turned parts, with different shape and size, such as • electric motor shafts • ground or turned parts • gage pins • piston pins • hydraulic components Based on an Xactum high speed, high accuracy Laser Micrometer, the Meclab.X system uses a CE-100 Operator’s Interface Panel with integrated touch sensitive Keyboard and large LCD screen to provide an extremely friendly interface to the user.

Available systems Meclab.X basic The basic system consists of: • XLS40 or XLS80 Xactum Intelligent Laser Sensor • Base for the system • CE-100 Operator’s Interface Panel, Bench-Top version • Meclab.X software pre-installed in the sensor • Power supplies and connecting cables Meclab.X-S The S version includes a flat granite basement with a precision linear stage to mount the holding accessories and to move the part. The slide can be 400, 640 or 820 mm long with useful range 160, 400 or 580 mm. Meclab.X-SQ/SR In some version an equipped base is mounted under the granite base, containing the...

Very flexible in use The Meclab.X System measures the part diameter D and the position of the part axis C or the positions of the edges of the part, Tot (upper) and Bot (lower), all referred to the center of the measuring field. 3 measuring modes are available: Free running, On-Command Single Shot and On-Command Continuous. An additional Auto-start mode is included to trigger automatically a Single Shot measurement when a part is detected by the laser. During the On-Command Continuous mode, for every measured variable the maximum, minimum and average values are retained, as well as the...

Specifications BASIC SYSTEM SQ/SR VERSIONS Type of gauge Measuring Field Measurable Diameters Resolution (Selectable) Linearity (Centred Product) Linearity (in the Measuring Plane) (3) Repeatability (T=1s, ±2 ) Single Shot Repeatability (±2 ) Beam Spot Size (s,l) (4) Side Dither of the Scanning Plane Scanning Frequency Scanning Speed Gauge Thermal Coefficient (5) Laser Source Dimensions of the Basic System (6) Weight of the Basic System (6) Dimensions of the S Version (6) Weight of the S Version (6) Dimensions of SQ/SR Version (6) Weight of SQ/SR Version (6) VLD (Visible Laser Diode); (mm)...