Extruline.X
4Pages

Laser system for on-line diameter measurement and automatic extrusion control. Laser Systems Extruline.X is a laser system designed to control the external diameter of extruded products such as electrical wires, plastic tubes and similar products. h addition to the diameter measurement and tolerance checking, Extruline.X can provide the automatic extrusion process regulation, detect and locate diameter flaws all along With non contact technology it is possible to measure moving products, hot or soft, where conventional instruments cannot be used and may even damage the product. PRECISION LASER SYSTEMS

System configuration The Extruline.X system is based on an Xactum laser gauge, installed at the exit of the extruder, which measures the external diameter of the product The Extruline.X system uses single-axis Xactum Laser Gauges. The measured average diameter is continuously compared with the nominal value pre-set by the operator: if the product size is going out of the pre-set limits, the Extruline.X software automatically corrects the extruder so that the product is always within the desired tolerance limits. • XLS40, XLS80 or XLS150 , Xactum Laser Gauge; • CE-100, Operator’s Interface...

The Extruline.X software is pre-loaded inside the Xactum gauge and, thanks to its modular structure (basic package + optional Regulation, Statistics and Flaw Location) it can meet all operational requirements. Special care has been taken to ensure that the system is easy to use and simple to program even by non-experts. Through the CE-100 Interface Panel, the operator uses function keys and pop-up menus to select the various functions or to enter the numerical values requested by the program. The basic package includes the following functions: • Display of the measured diameter and of the...

EXTRULINE.X40/A Type of gauge Measuring Field Measurable Diameters Resolution (Selectable) Linearity (Centred Product) Linearity (in the Measuring Plane) (4) Repeatability (T=1s, ±2 ) (±2 ) Beam Spot Size (s,l) (5) Side Dither of the Scanning Plane Scanning Frequency Scanning Speed Gauge Thermal Coefficient (6) Laser Source Dimensions Weight VLD (Visible Laser Diode); (mm) (kg) Notes (1) For Ø 25 mm. For Ø 25 mm the linearity is ± 0.75 μm. The value is inclusive of the Aeroel’s masters uncertainty (± 0.3 μm ) (2) For Ø 40 mm. For Ø 40 mm the linearity is ± 1.5 μm. The value is inclusive of...