Barline.X
4Pages

Laser Systems BARLINE.X Laser System for on-line diameter control of bars and tubes. The Barline.X Laser System has been specially designed for on-line gauging of the outside diameter of products manufactured in cut lengths; such as steel ground bars, steel drawn tubes, copper tubing, etc. The main functions of the system are as follows: • through-feed measurement and display of the external diameter • tolerance checking and output alarms for part sorting • real-time grinder regulation • processing and printing of statistical reports • interface with remote computer

System configuration The Barline.X System is based on an Xactum Laser Gauge, installed at the output of the grinder or drawing bench, which measures very accurately the outside diameter of the product passing through the laser beam. The non-contact operating principle enables through-feed inspection, without having to stop or slow down the product, as its vibration and movement do not affect the gauging accuracy. The Barline.X system uses single-axis Xactum Laser Gauge. The measured average diameter is continuously compared with the nominal value pre-set by the operator: if the product size...

The Barline.X Software The Barline.X software is pre-loaded inside the Xactum gauge and, thanks to its modular structure (basic package + optional Regulation and Statistics) it can meet all operational requirements. Special care has been taken to ensure that the system is easy to use and simple to program even by nonexperts. Through the CE-100 Interface Panel, the operator uses function keys and pop-up menus to select the various functions or to enter the numerical values requested by the program. • Regulation is started after having positively checked a real trend to drift from the nominal...

Measuring Field Measurable Diameters Resolution (Selectable) Linearity (Centred Product) Linearity (in the Measuring Plane) (4) Beam Spot Size (s,l) (5) Side Dither of the Scanning Plane Scanning Frequency Scanning Speed Gauge Thermal Coefficient (6) VLD (Visible Laser Diode); Laser Source 25 mm the linearity is ± 0.75 μm. The value is inclusive of the Aeroel’s masters uncertainty (± 0.3 μm ) 40 mm the linearity is ± 1.5 μm. The value is inclusive of the Aeroel’s masters uncertainty (± 0.3 μm ) 70 mm la linearità è ± 5 μm. Tale valore include l’incertezza dei master Aeroel (± 0.3 μm ) (4)...