*mydirectindustry

COMPACTFLAT S15

Product catalog summary

Overview: The CompactFLAT S15 is an aerodynamic substructure designed for mounting photovoltaic (PV) modules on flat roofs. It is part of the CompactFLAT product range and is characterized by its stability, intelligence, and reduced ballast requirements due to its aerodynamic design.

Specifications: The system is available with a 15° incline and offers different row spacing options. It is suitable for various roof types, including foil, bitumen, and concrete roofs, and can be adapted for gravel and green roofs. The module dimensions range from 950 to 1150 mm in width and 1500 to 2250 mm in length. The system supports a maximum building height of 25 meters and a roof pitch of up to 5° without anchors.

Structural Features: The CompactFLAT S15 features a "spring effect" in its feet for optimal surface adjustment and water drainage on all sides. It includes a pre-installed building protection mat and is TÜV-certified in line with UL 2703. The system has been wind tunnel-tested and includes a wire management solution for string-wiring of module rows.

Installation and Performance: The system is partly pre-assembled, facilitating quick installation. It is designed to handle wind suction loads up to 2.4 kN/m² and snow pressure loads up to 4.4 kN/m² for the Alpin version. The system's design and stability are verified through software-supported wind tunnel analyses.

Materials and Components: The main components include module clamps with grounding pins, flat-roof brackets, wind deflector plates, and ballast stones. The materials used are aluminum for the bearing parts and module clamps, stainless steel for screws, and steel with aluminum-zinc coating for wind deflector plates and ballast trays.

Advantages: Key benefits include no roof penetration, suitability for roof edge areas, optimal module ventilation, and low transport costs. The system offers a 25-year product warranty and is engineered in Europe.

Additional Information: The CompactFLAT S15 is stored in the AeroTOOL 3D engineering software, and project reports can be generated based on empirical data. The system is designed for high transport density, with 700 kWp per truck or container, and requires a minimum order quantity of 2 kWp.

Catalog excerpts

COMPACTFLAT S15 AERODYNAMIC. STABLE. INTELLIGENT. Compact and tested substructure for the single-sided stand-mounting of PV modules on flat roofs The system, as part of the CompactFLAT product range, is an aerodynamic south-substructure for the fixing and aligning of framed PV modules on flat roofs. It is available at an incline of 15° and with a choice of different row spacing.

Open the catalog to page 1

YEARS PRODUCT WARRANTY WIND TUNNELTESTED The aerodynamic design boasts exceptional structural properties and requires considerably less ballast than other systems on the market. Due to the special “spring effect” of the feet, the substructure adjusts optimally to the conditions of the surface structure. Since the design is not rail-bound, water drainage is provided on all sides. Like the CompactFLAT S10plus, the CompactFLAT S15 also has a 25-year warranty, has been wind tunnel-tested, TÜV-certified in line with UL 2703, and is supplied with a pre-installed building protection mat. With special...

Open the catalog to page 2

TECHNICAL DATA xxxx Inspection dimensions Name Date 06.10.2020 nan 26.03.2021 mru 26.03.2021 nan approved released current status 950 – 1‘150 mm x 1‘500 – 2‘250 mm (width x length) 15°, unilateral CompactFLAT S15 (18° internal shading angle): 790 mm CompactFLAT S15 (25° internal shading angle): 571 mm Distance from the roof surface / floor surface Approx. 60 mm; potentially less on gravel roof H G F E D C B A established approved released xxxx Inspection dimensions Name Date 06.10.2020 nan 26.03.2021 mru 26.03.2021 nan current status Overview drawing for generell information and illustration...

Open the catalog to page 3

Conception and design: Welke Consulting Gruppe®, Siegen, Germany › M odule clamps with integrated grounding pins › N o roof penetration necessary › A lso suitable for roof edge areas › M ain structure produced from aluminum and stainless steel › Water drainage provided on all sides › O ptimum module ventilation › P re-installed building protection mat › M inimum order quantity only 2 kWp › uickest installation: 1 kWp / Q 5 min. / 2 people › ptimized wind suction openings O › ow transport costs L › ÜV-certified as per UL 2703 T › ind tunnel-tested W › ngineered in Europe E › eneral building inspectorate...

Open the catalog to page 4

COMPACTFLAT S15

COMPACTFLAT S15

Catalog excerpts

All AEROCOMPACT Europe GmbH catalogs and technical brochures