COMPACTFLAT S10PLUS

Product catalog summary

Overview
The CompactFLAT S10plus is an aerodynamic, stable, and intelligent substructure system designed for the two-sided stand-mounting of photovoltaic (PV) modules on flat roofs. It is part of the CompactFLAT product range and is available with a 10° incline and various row spacings. The system is designed to require less ballast due to its aerodynamic properties and features a unique 'spring effect' for optimal surface adjustment.

Specifications
- Installation Angle: 10°, bilateral
- Module Dimensions: 950–1150 mm x 1500–2250 mm
- Row Spacing: 464 mm or 297 mm depending on internal shading angle
- Max Building Height: 25 m (adaptable for taller buildings)
- Max Roof Pitch: Up to 5° without roof anchors
- Max Field Size: 12 x 8 double rows (192 modules)
- Wind Load: Suction load up to 2.4 kN/m²
- Snow Load: Pressure load up to 4.4 kN/m² for Alpin version

Features
- Quick installation: 1 kWp in 5 minutes with 2 people
- Pre-installed building protection mat
- Water drainage on all sides
- No roof penetration necessary
- Suitable for roof edge areas
- Made from aluminum and stainless steel
- TÜV-certified and wind tunnel-tested
- 25-year product warranty

Installation and Use
The system is suitable for foil and bitumen roofs, with or without heat insulation, and can be adapted for gravel and green roofs. It requires sufficient structural load-bearing capacity and compressive strength of the roof structure. The system is delivered partly pre-assembled and includes a newly developed building protection mat.

Materials
- Aluminum EN AW 6060 T64 for bearing parts
- Aluminum EN AW 6063 T66 for module clamps
- Stainless steel A2-70 for screws
- Steel with aluminum-zinc coating for ballast trays
- Polyester fleece for building protection mat

Additional Information
The CompactFLAT S10plus is stored in the AeroTOOL 3D engineering software, and project reports can be issued based on empirical data. The system is designed for high transport density and low transport costs, with a minimum order quantity of 2 kWp.

Catalog excerpts

COMPACTFLAT S10PLUS AERODYNAMIC. STABLE. INTELLIGENT. Compact and tested substructure for the two-sided stand-mounting of PV modules on flat roofs. The system, as part of the CompactFLAT product range, is an aerodynamic east–west-substructure for the fixing and aligning of PV modules on flat roofs. The system is available at an incline of 10° and with different row-spacing.

Open the catalog to page 1

YEARS PRODUCT WARRANTY WIND TUNNELTESTED The aerodynamic design boasts exceptional structural properties and requires considerably less ballast than other systems on the market. Due to the special “spring effect” of the feet, the substructure adjusts optimally to the conditions of the surface structure. Since the design is not rail-bound, water drainage is provided on all sides. With the CompactFLAT S10plus, it is possible to install every kWp in just three minutes. Like the CompactFLAT S, the CompactFLAT S10plus also has a 25-year warranty, has been wind tunnel-tested, TÜV-certified in...

Open the catalog to page 2

Für diese Zeichnung behalten wir uns alle Rechte vor, auch für den Fall der Patenterteilung oder Gebrauchsmustereintragung. Ohne unsere vorherige, schriftliche Zustimmung darf diese Zeichnung weder verfielfältigt, noch Dritten zugänglich gemacht werden. Diese Zeichnung darf durch den Empfänger oder Dritte auch nicht in anderer Weise missbräulich verwendet werden. Zuwiderhandlungen verpflichten zu Schadenersatz und können strafrechtliche Folgen haben. We reserve all rights for this drawing also in case of patent or registration of design. This drawing may neither be copied nor opened to a third...

Open the catalog to page 3

Conception and design: Welke Consulting Gruppe®, Siegen, Germany › M odule clamps with integrated grounding pins › N o roof penetration necessary › A lso suitable for roof edge areas › M ain structure produced from aluminum and stainless steel › Water drainage provided on all sides › O ptimum module ventilation › P re-installed building protection mat › M inimum order quantity only 2 kWp › uickest installation: 1 kWp / Q 5 min. / 2 people › ptimized wind suction openings O › ow transport costs L › ÜV-certified as per UL 2703 T › ind tunnel-tested W › ngineered in Europe E › eneral building inspectorate...

Open the catalog to page 4

COMPACTFLAT S10PLUS

COMPACTFLAT S10PLUS

Catalog excerpts

All AEROCOMPACT Europe GmbH catalogs and technical brochures