AERO-PORO/AERO-TIMBER
4Pages

AERO PORO AERO TIMBER ... and all common heavy lifting work in a joinery or a carpentry can be carried out without tiring and by one person only.

AERO PORO The AERO-POROs are perfect for furniture manufacturing, joinery, carpentry, any kind of woodworking or woodtrading companies where sheets or panels have to be moved regularly. With AERO-POROs you can effortlessly lift panels up to approx. 5.10 x 2.50 m from only one person - regardless whether these panels are permeable to air or airtight. Thus, e.g. solid wood panels, chipboard and laminated chipboard, MDF, HDF, OSB, plywood, plasterboard, gypsum fibreboard and also polystyrene boards or plastic boards. Vacuum/Release/Swivel with ergonomic handle with lifting magnet [Article No....

The AERO-TIMBER are designed for long material up to approx. 13 m in length and approx. 48 cm in width. For example glued-laminated timber, solid structural timber, rough sawn beams, but also unedged wood. Due to the 3 individually lockable chambers in each suction plate, frames from only 8 cm in width and also unedged wood with core cracks in the middle of the board can be lifted. Vacuum/Release radio controlled [Article No. 1030785] or Vacuum/Release/Crane radio controlled [Article No. 1030786] AERO TIMBER AERO TIMBER 600/4M 3K For both types of devices AERO-TIMBER and AERO-PORO the...

> AERO-LIFT vacuum lifting devices are designed and built in compliance with the applicable safety standards according to EN 13155 and ASME B30 and are tested and documented according to the applicable accident prevention regulations BGR 500 and the machinery directive 2006/42/EG, annex II A! > The final acceptance tests are carried out in compliance with VDE 0113 and EN 60204. > We offer to determine the maximum load-bearing capacity for your very special cargo by a representative sample test at AERO-LIFT. > All welding work is carried out according to the applicable standards in...