WiSTAR
4Pages

Appareil de mesure Wireless WIMOD WiSTAR is a professional ergonomic receiver to measure FORCE, WEIGHT, PRESSURE, TORQUE and DISPLACEMENT, extremely versatile and easy to be used. Through an integrated wireless communication system it is possible to directly interface with 1, 2, or 4 WIMOD modules at the same time in the re time. The transmission frequency at 433 MHz makes the communication safe and reliable even in presence of other transmission systems such as mobile phones, walkie-talkie, radio-microphones, remote-controls etc. which usually work on other frequencies by ensuring a covering of approx. 100 meters in free space. Measurements are showed on a big graph backlighted display. WiSTAR is equipped with USB interface for communicating in real time with a PC for recharging the long lasting and highly reliable internal battery (Li-Ion). In addition to the direct reading of the measurements it is possible to detect PEAKS and to block the measurement on the display thanks to HOLD function. Through the internal DATA LOGGER it is possible to record up to 130.000 measurements either at programmed intervals of time or manually through the REC key. To every recording performed it is assigned the date and the time, the nit is possible to show the recordings on the display or download them on a PC through the USB port. It has been integrated also the TOTAL function which allows to display the sum of measurements detected from several sensors in real time. This function is highly appreciated when the application requires to weigh a big dimensions manufactured article by using several dynamometers at the same time. Pressur Force Torque Displace in yo HANd Typical Applications: Mobile weighing. Overhung loads monitoring Monitoring of pressures on hydraulic and pneumatic plants. Long term recording through programmable DATALOGGER. Manual recording in the internal memory. Quality control in the production lines and warehouses. Test on the handling of manual and automatic loads Monitoring of cracks through displacement transducers in the building industry

Available combinations: It is possible to simultaneously connect to the WiSTAR (through a Wireless connection) n° 1, 2, 3 or 4 WIMOD modules directly connected to the load cells or in the stand alone mode. Overhung loads monitoring by using T20, D200 etc. .. dynamometers or load cells Displacements Monitoring by using LDT transducers. Monitoring of pressures by using con TP1 and TP16 pressure transducers. Monitoring of different sensors for example: LDT for displacement measurements TP1 for pressure measurements TRX for torque measurements. C2S for force or weight measurements.

Travelling case made of ABS Feeder with USB cable