Cable Testers
12Pages

Cable Testers Models CA7024, CA7027 & CA7028 Direct & Simple Handheld Mapping Devices ►MODEL CA7024 • Handheld Alphanumeric TDR (Time Domain Reflectometer) Cable Length Meter and Fault Locator • Measures cable length and indicates distance to open or short circuit faults to a range of 6000 ft (2000m) ►MODEL CA7027 • Handheld Graphical TDR Telecom Cable Tester • Measures cable length and indicates distance to faults and terminations to a range of 19,000 ft (6000m) ►MODEL CA7028 • Handheld LAN Cable Mapping and Troubleshooting Tester • Designed for use on UTP, STP, FTP and SSTP cabling equipped with RJ-45 connectors and wired to either TIA 568A/B (ISO 11801 & EN 50137) specifications Our products are backed by over 100 years of experience in test and measurement equipment, and encompass the latest international standards for quality and safety.  www.aemc.com Technical Assistance (800) 343-139

FAULT MAPPER Cable Length Meter & Fault Locator Alphanumeric TDR ► andheld Cable Length Meter and H Fault Locator ► etect opens and shorts and the distance D ­ to them from one end of the cable ► Measure cable length up to 6000 ft or 2000m (feet or meter selectable) ► utomatic cable impedance compensation A ► uilt-in library of most common cables B and their Velocity of Propagation (Vp) ► anual selection of Vp for all cables M not found in library ► ser programmable cable library stores up U to 15 settings ► Vp setting displayed along with length and cable type (if in library) ► uilt-in...

Model CA7024 SPECIFICATIONS MODEL MEASUREMENTS Range @ Vp = 70% 6000 ft or 2000m (feet or meter selectable) Resolution 0.1 to 100 ft, then 1 ft (0.1 to 100m, then 1m) Accuracy* ±2% of Reading Minimum Cable Length 12 ft (4m) Cable Library Built-in, user selectable & user programmable Velocity of Propagation (Vp) Adjustable from 0 to 99% Output Pulse 5V (peak to peak) into open circuit; ns rise step function Output Impedance Automatic compensation Tone Generator Oscillating tone 810 to 1110Hz Voltage Warning Triggers @ >10Vac/dc Power Source Four 1.5V AA Alkaline batteries Battery Life...

FAULT MAPPER PRO Model CA7027 ® Telephone/Coaxial/Parallel Cable Tester Graphical TDR ► andheld Graphical TDR H (Time Domain Reflectometer) ► etects opens, shorts, taps, faulty taps, D bridge taps, splitters, high resistance, wet cables, splices and more ► Identifies impedance mismatches ► ndicates cable faults and terminations up I to 19,000 ft or 6000m (user selectable) ► Works with twisted pair, parallel and coaxial cable The Fault Mapper Pro® Model CA7027 is a handheld graphical TDR (Time Domain Reflectometer) designed for identifying and locating faults on power and communication...

Model CA7027 SPECIFICATIONS MODEL 23, 49, 98, 197, 394, 820, 1640, 3280, 6560, 9850 and 19000 feet (7.01, 14.94, 29.87, 60.05, 120.09, 249.94, 499.87, 999.74, 1999.49, 3002.28 and 5791.20 meters) Manual range control ±1% of range Approximately 1% of selected range 1.5 ft (0.5m) Minimum 3 pixel return on a fault at 4km on 0.6mm 0, PE, TP Adjustable from 1% to 99% +5V peak to peak into an open circuit Selectable between 25, 50, 75 & 100Ω 3 ns to 3 ms, automatic with range 2 scans / second or scan held Oscillating tone 810Hz to 1110Hz 250Vac 4 x 1.5V AA Alkaline batteries 60 hours continuous...

FAULT MAPPER PRO Model CA7027 ® FUNCTIONAL DISPLAYS Typical Traces - The graphic display on the Model CA7027 will display the waveforms associated with the conditions found in communication and other cables. The cursor may be moved to the left or right to indicate the ­ distance to condition. Additionally, the Velocity of Propagation (Vp) and the impedance are also displayed. ­ Open Conductor Shorted Conductor Frayed Cable Water Ingress

WIRE MAPPER PRO Model CA7028 LAN Cable Tester Direct and simple push button operation! The only wire mapper in its class with ­ raphical and g digital display of fault type and fault location. The Model CA7028 also has the ability to identify telephone and data lines. If the main unit is plugged into an operational RJ-45 socket, it will give a ­ ontinuous warning tone and display if a c telephone voltage is present on any of the pins. ­ If the service detect key is pressed, it will check and display telephone, 10BaseT, 100Mbit+ and token ring ­ ctive service if present. a ▶ andheld LAN...

Model CA7028 includes the remote ID #1 Model CA7028 used to locate and test a cable from the patch panel to an office a few hundred feet away. APPLICATIONS ► Identify LAN wiring faults ► Find distances (feet or meters) to opens and shorts ► Test patch cords ► Test for active service ► Trace cable locations ► Measure cable length ► Map network layout ► Verify proper installation of RJ-45 connectors on cables 8 www.aemc.com Technical Assistance (800) 343-1391

Model CA7028 FUNCTIONAL DISPLAYS In addition to displaying the cable wire map, the Model CA7028 also displays a pass/fail indication, the ID number of the remote ­ unit, the cable type (if from the built-in library), cable length and the Velocity of Propagation (Vp) all on one screen. The mapping of each pair is graphically displayed providing a ­ quick ­ndication of the termination at both ends of the cable. i Opens or shorts along the cable are identified by wire and ­ distance to the fault. The Model CA7028 also detects and displays opens or shorts at each end of the cable, thus...

WIRE MAPPER PRO Model CA7028 The Model CA7028 can also detect the service capability of the cable under test. It can identify 10BaseT, 100BaseT, token ring or telephone ­connections. ­ Service Test Screen The built-in tone generator function is activated at the push of a button. When active, a signal between 810 and 1110Hz ­ is injected into the cable. When used in conjunction with the Tone Receiver/ Cable Tracer Model TR03, cable tracing and l ­ocating is easily accomplished. ­ Setup Screen Service test function determines speed and type of transmission. CONSTRUCTION Quick and easy setup...