*mydirectindustry

Catalogs
AEMC Instruments
AC/DC Current Probe MR400 & MR500 Series

AC/DC Current Probe MR400 & MR500 Series

Product catalog summary

Overview: The AEMC MR400 and MR500 Series are professional AC/DC current probes designed to enhance the current measuring capabilities of digital multimeters (DMMs), oscilloscopes, and other instruments. They are compliant with EN 61010, 600V Cat. III safety standards and are equipped with CE Mark and UL approval.

Specifications:

MR400 Series: Measurement range of 400AAC/600ADC.
MR500 Series: Measurement range of 1000AAC/1500ADC.
Output signals are 1mV/A and 10mV/A.
Jaw opening of 1.55" (40mm) with a maximum conductor size of one 1.18" (30mm) cable or two 0.95" (24mm) cables.
Power source: 9V Alkaline battery with approximately 120 hours of life for MR410/MR520 and 50 hours for MR411/MR521.

Features:

Two distinct jaw shapes for hooking or prying around conductors.
Auto-zero push button available on MR411, MR461, MR521, and MR561 models.
Low phase shift for accurate power measurements.
Designed for use with DMMs, recorders, oscilloscopes, power, and harmonic meters.

Applications:

DC motors and batteries.
Automobile engine testing.
Power quality analysis and load monitoring.

Construction: The probes feature a protective non-slip guard and a lever for jaw opening/closing. They include a 5 ft (1.5m) cable with a safety banana plug (ø 4mm).

Ordering Information: Various models are available, each including a user manual. Optional accessories include adapters for safety leads and banana to BNC adapters.

Catalog excerpts

AC/DC Current Probe MR400 & MR500 Series-1

► MR400 Series has a measurement range of 400Aac/600Adc ► MR500 Series has a measurement range of 1000Aac/1500Adc ► Designed to EN 61010, 600V Cat. III safety standards

Open the catalog to page 1

AC/DC Current Probe MR400 & MR500 Series-2

FEATURES ➤ MR400 Series has a measurement range of 400AAC/600ADC ➤ MR500 Series has a measurement range of 1000AAC/1500ADC ➤ Two distinct jaw shapes to be used for hooking or prying around the conductor ➤ Auto-zero push button for MR411, MR461, MR521 & MR561 ➤ Conforms to EN 61010, 600V, Cat. III safety standard ➤ Low phase shift for power measurements ➤ mV output signals ➤ Designed for DMMs, recorders, oscilloscopes, power and harmonic meters ➤ Designed to EN 61010, 600V Cat. III safety standards Model MR520 measuring DC current of a DC engine The AEMC ® MR Series AC/DC Probes are professional...

Open the catalog to page 2

AC/DC Current Probe MR400 & MR500 Series-4

CONSTRUCTION Jaw Opening: 1.55" (40mm) Conductor Size: one 1.6" (42mm) cable max, two 0.98" (25mm) cables max, two bus bars 1.96 x 0.19" (50 x 5mm) Protective non-slip guard Lever for jaw opening/closing Green light (on when battery voltage ≥6.5V) Two-position range selection switch Safety banana plug ø 4mm ORDERING INFORMATION AC/DC Current Probe Model MR410 (Cable – 1mV/A – 60A max). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #1200.70 Includes user manual AC/DC Current Probe Model MR411 (Cable – 10mV/A – 60A max y 1mV/A – 600A max) . . . . . . . . . . ....

Open the catalog to page 4

All AEMC Instruments catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list