ZCM
8Pages

Zigbee-Control Module for lighting drivers Electronic ballast and LED driver Smart analog and digital control The ZCM series of fully isolated controllers are designed for the demands of high performance Smart Lighting applications. They offer an extremely long lifetime due to the use of highly reliable components and a proprietary topology. They feature an efficient Energy- on-Demand management capability when used with any dimmable electronic ballast, and are ideal for implementation of SmartGrid lighting solutions. These smart wireless controllers operate in a Zigbee network and offer three dimming output options: » Analog (ZCMA) » DALI (ZCMD, under development) » Wireless networking using ZigbeeTM standard Dimming output: analog, PWM or DALI » Input sensors: motion, light, temperature » High power remote ON/OFF AC output (300W) » Network operation without coordinator » Stand-alone operation » High reliability: life time >10 years The ZCM controllers are available with a switched AC power output rated at 300W, suitable for feeding an external LED driver. This output can be turned on or off via the Zigbee network, allowing reduced power consumption in standby operation to help comply with Energy Star. An auxiliary output of 12V/65mA is suitable for driving motion sensors, lumen sensors or cooling devices. The controllers have a standard enclosed plastic housing Note: higher IP level and/or customized housing can be STANDARD FEATURES » Conformal coated PCB in IP20 housing » Operating temperature range: -30°C to +60°C (with » Thermal feedback dimming » Full safety approval (ENEC and UL pending; CE) POWER SOLUTIONS

DRIVER INPUT/OUTPUT SERIES SPECIFICATION Nominal input voltage Voltage range Maximum input current Output power capacity Surge immunity Input connector Output connector Output voltage (optional) Nominal voltage Voltage range Inrush current limit Power consumption Surge immunity Maximum 300W output to LED driver Push & lock, 2 pole (for wire diameter 0.75 - 1.5mm2) Push & lock, 2 pole (for wire diameter 0.75 - 1.5mm2) Same as input voltage (switched output to driver module) AUXILIARY POWER OUTPUT (OPTIONAL) Nominal voltage LOGIC INPUT <1.2W for ZCM only, without accessories connected 2 pole...

DIMMING OUTPUT (ZCMD, UNDER DEVELOPMENT) SERIES SPECIFICATION Signaling protocol Radio standard Output power Maximum antenna gain Environmental protection Operating temperature range Storage temperature range Overall dimensions Push & lock, 2 pole (for wire diameter 0.5 - 1 mm2) Miniature coax Conforms to radio standard for ZIGBEE (TBD) Conformal coating in an IP20 enclosure -40°C to +60°C (with battery) ambient. Module will start at -40°C

APPLICATION INFORMATION DIMMING OUTPUT The ZCM-series provides a dimming output signal to be used with an associated LED driver. This dimming output can be either a standard 0-10 V analog control signal a PWM or digital (DALI) output. Refer to ordering information for corresponding part numbers. The dimming output can also be used with any other dimmable electronic ballast, allowing the ZCM to control lighting technologies such as fluorescent or plasma The ZCM-series offers an optional AC output (300W maximum) which can switch the AC power input of the driver. By using the ZCM-series ON/OFF...

APPLICATION INFORMATION The ZCM-series supports dimming through the ZigBee wireless interface. AEG-proprietary configuration software ("Clairbee") is available that interfaces with the Zigbee module, allowing the user to enter preset dimming levels for different conditions and different times of day, as required. The dimming can also be linked to the optional motion sensor and ambient light sensor inputs, to allow full control of brightness in a network. (Consult AEG Power Solutions for more information on MOTION SENSORS The ZCM-series works with 1 or 2 logic level motion sensors (active...

OPTIONS AND GENERIC FUNCTIONS Part number POWER INPUT/OUTPUT FUNCTIONS LED driver AC power output (up to OUTPUT FUNCTIONS Auxiliary output voltage (50-65mA) Anolog dimming output (+/-10mA) DALI interface dimming output INPUT FUNCTIONS Temperature sensor (analog) STAND ALONE OPERATION Night duration estimation without RTC* Night duration estimation with RTC** NETWORK OPERATION DIMMING ACTION FROM LUMEN SENSOR Illuminating level setting (minimum lumen value) *Options under development **Real-time clock

DIMMING ACTION FROM TEMPERATURE SENSOR OPTIONS AND GENERIC FUNCTIONS Lighting dimming versus temperature Real-Time Clock LED driver power consumption LED driver energy consumption LED real operating time measurement ZCMAC ZCMA LED lighting depreciation compensation no yes yes yes yes RF antenna option option option option option Motion sensors #1, #2 option option option option option Lumen sensor option option option option option Temperature sensor option option option option option *Options under development

ZCM-series Left side marking Top view marking AC in: DG127-5.08 (Line , Neutral) Lumen Sensor (4 pins) Vaux - +: DG250-3.5 (12V-65mA) Antenna (RF output) Dim - +: DG250-3.5 (analog/ pwm) Reset Button (hard boot) Temp - +: DG250-3.5 (temperature ) AC out: DG127-5.08 (Line , Neutral) Right side marking Motion Sensor #2 - +: DG250-3.5 Motion Sensor #1 - +: DG250-3.5 PRODUCT VERSION ZCM-series ZCMA (analog dimming) PART NUMBER AN1299AA AN1299AB ZCMP (PWM dimming) AN1299AD ZCMD (DALI dimming) AN1299AC ZCMDC (DALI dimming) ordering information ZCMAC (analog dimming) AN1299AE AEG Power Solutions 4...