SEQUENCE TIMERS

Product catalog summary

Introduction
This document details the TS1 Series Sequence Timers, designed for cyclic control of electrovalves in dust collection systems and similar applications. The timers optimize cleaning cycles by adjusting blow and pause times, ensuring efficient air usage.

Working Principle
The TS1 Series timers are housed in a plastic enclosure with a transparent cover, featuring a static electronic circuit composed of CMOS technology and triacs. They are available in versions supporting up to 8, 16, or 32 outputs.

Operation

Cyclic commutation of electrovalves ensures each sleeve is cleaned.
Adjustable time intervals between cleaning pulses (Pause 1) and between complete cycles (Pause 2).
Regulation of valve opening time for optimal cleaning.
LED indicators display operational status for pauses and work phases.
Device can enter a holding stage via a pressure switch or external contact if pressure loss occurs.

Technical Characteristics

Power Supply: 24-110-220Vac ± 15% 50-60Hz or 24 Vdc.
Output Voltage: Same as power supply.
Max Output Current: 1A with 1A fuse protection.
Temperature Limits: -10 to +60°C.
IP Rating: IP65.
Standard Work Time: 0.1-1 sec (up to 2 min on request).
Standard Pause 1 Time: 0.6-6 sec (up to 2 min on request).
Standard Pause 2 Time: 30 min (up to 25 h on request).

Product Variants

TS1-8 Series: Available in 4 or 8 output versions.
TS1-16 Series: Available in 12 or 16 output versions.
TS1-32 Series: Available in 24 or 32 output versions.

Wiring Diagrams
Wiring diagrams are provided for each series (TS1-8, TS1-16, TS1-32) to assist in installation and setup.

Additional Notes
If supplied with 110Vac or 220Vac, voltage selection is possible. For 24Vac, voltage selection is not available.

Catalog excerpts

timer sequenziali sequence timer

Open the catalog to page 1

TEMPORIZZATORI SEQUENZIALI SERIE TS1 SEQUENCE TIMERS TS1 SERIES WORKING PRINCIPLE Questa apparecchiatura è stata studiata e realizzata appositamente per il comando ciclico, These devices have been studied and designed for the cyclic control of the cleaning ele- a mezzo di impulsi in sequenza, delle elettrovalvole di soffiaggio nei filtri a maniche in im- ments in sleeve filters (dust collection systems, mills, etc.). pianti di depolverizzazione, abbattimento polveri, molini, ecc. They are housed in a plastic enclosure with a transparent cover and are completely isolat- Consente la variazione...

Open the catalog to page 2

SEQUENCE TIMERS TS1 SERIES TEMPORIZZATORI SEQUENZIALI SERIE TS1 SCHEMA DI COLLEGAMENTO TS1-32 / WIRING DIAGRAM TS1-32 LAVORO WORK La serie TS1-32 si suddivide in due modelli: TS1-32/24U fino a 24 uscite TS1-32/32U fino a 32 uscite SELETTORE SELECTOR TS1-32 series is available in two versions: TS1-32/24U with 24 outputs TS1-32/32U with 32 outputs FUSIBILE FUSE CONTATTO ESTERNO EXTERNAL CONTACT ALIMENTAZIONE POWER SUPPLY COM. SCHEMA DI COLLEGAMENTO TS1-8 / WIRING DIAGRAM FOR TS1-8 LAVORO / WORK SCHEMA DI COLLEGAMENTO TS1-16 / WIRING DIAGRAM FOR TS1-16 LAVORO / WORK PAUSA 2 / PAUSE 2 SELETTORE /...

Open the catalog to page 3