*mydirectindustry

Catalogs
AECO
MAGNETIC SENSORS FOR CYLINDERS

MAGNETIC SENSORS FOR CYLINDERS

Product catalog summary

Overview: The document provides technical specifications and installation instructions for Aeco's Magneto-Resistive Sensors, specifically the SHP-6T and SEM-6T series. These sensors are designed for precise shaft positioning in pneumatic cylinders by detecting the magnetic field generated by a permanent magnet.

Technical Specifications:

Response Sensitivity: < 2.8 mT for SHP-6T, < 3 mT for SEM-6T.
Voltage: 10 ÷ 30 V for SHP-6T, 10V DC ÷ 250V AC/DC for SEM-6T.
Switching Frequency: < 2 Hz for SHP-6T, < 10 Hz for SEM-6T.
Hysteresis: < 20% for both series.
Max Output Current: 100 mA for SHP-6T, 40mA / 250V, 100mA / 100V for SEM-6T.
Temperature Limits: -25 ÷ +75°C for both series.
IP Rating: IP67 for both series.

Installation Instructions:

Insert the sensor into the T-slot of the cylinder.
Turn the sensor to align it properly.
Tighten the fixing screw to secure the sensor.

Wiring Diagrams:

For SHP-6T: Brown wire for positive, Blue for negative, Black for output PNP NO.
For SEM-6T: Brown wire for positive, Blue for negative, output NO.

Additional Features:

Both series include an LED indicator for signaling the final cylinder shaft position.
Short circuit protection is incorporated in both series.

Contact Information: Aeco S.r.l., via G. Leopardi, 5, 20065 Inzago (MI), Italy. Tel: ++39 02 954381, Fax: ++39 02 9548528, Email: [email protected], Website: www.aecosensors.com

Catalog excerpts

magnetic SENSORS for cylinders

Open the catalog to page 1

Magneto-Resistive Sensors “SHP-6T” SERIES The Aeco Magneto-Resistive sensors SHP series are particularly suitable for applica tions where is needed know the exact shaft positioning of a pneumatic cylinder . To achieve this information the magnetic field generated by the permanent magnet in the cylinder is detected by means of a sensor fixed externally in the T slot. When the magnet approaches the sensor a sensible component to the magnetic field contained in its electronics controls that a given value is reached. When reaching such value the LED indicator and the sensor output activate signaling...

Open the catalog to page 2

MAGNETIC SENSORS “SEM-6T..” SERIES Fixing Screw Fixing Screw M8 MALE CONNECTOR MOBILE METAL RING TECNICHAL CHARACTERISTICS Response sensitivity Continuous voltage (res. ripple <10%) Max. output current Max. switching power Voltage drop (sensor ON) Hysteresis Repeatability Sensing point Short circuit protection Temperature limits WIRING DIAGRAMS SWITCHING DIAGRAM Insert sensor Tighten screw Turn sensor VIEW OF MALE CONNECTOR H1 ETC000408 via G. Leopardi, 5 20065 Inzago (MI) Italy - Tel. 0295438.1 (5 linee r.a.) Fax 029548528 http://www.aecosensors.com E-mail: [email protected]

Open the catalog to page 3

MORE THAN SENSORS via G. Leopardi,5 - 20065 Inzago (Milano) ITALY email: [email protected]

Open the catalog to page 4

All AECO catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list