1. Catalogs
  2. AECO
  3. CONNECTORS

CONNECTORS

CONNECTORS

CONNECTORS

Product catalog summary
Connectors Overview
This document provides technical specifications and details for various connectors used with inductive, capacitive, and photoelectric sensors. The connectors are categorized based on their compatibility with different plug types (H1, H, and K) and their respective models.

Specifications
  • M8 Connectors for H1 Plug: Available in models with 3 or 4 poles, using PUR cables of 5 meters. Specific models include Mod. 21, Mod. 19, and Mod. 22, with options for LED PNP indicators.
  • M12 Connectors for H Plug: These connectors also come in 3 or 4 pole configurations, with PVC cables of varying lengths (2m or 5m). Models include Mod. 14, Mod. 15, and others, with options for LED PNP and NPN indicators.
  • Connectors for K Plug: Models 11 and 12 are included with the sensors and have a protection rating of IP65.

Procedures and Recommendations
  • For sensors with H1 and H plugs, the female connector is not included and must be ordered separately.
  • Ensure the cable gland is tightened properly on M12 H plug sensors to maintain the IP67 protection rating.
  • For K plug connectors, ensure the cable gland is tightened to maintain the IP65 protection rating.

Protection Ratings
  • M8 connectors for H1 plug and M12 connectors for H plug have an IP67 rating.
  • K plug connectors (Mod. 11 or 12) have an IP65 rating.

Contact Information
Aeco s.r.l., via G. Leopardi, 5 - 20065 Inzago (Milano) ITALY
Tel. ++39 02 954381 - Fax ++39 02 9548528
Email: [email protected]
Website: www.aecosensors.com
See more

Catalog excerpts

CONNECTORS-1

connettori connectors

 Open the catalog to page 1
CONNECTORS-2

• Nei sensori con attacco H1 e H il connettore femmina non è incluso nella fornitura e deve essere ordinato a parte. • Nei sensori con attacco K il connettore femmina Mod. 11 o Mod 12 è già incluso nella fornitura. • I connettori per attacco H1 (M8) ed H (M12) hanno un grado di protezione IP67. Nei modelli per attacco H (M12) a cablare serrare bene il pressacavo di uscita cavo sul cavo stesso. • I connettori per attacco K Mod, 11 o Mod. 12 hanno un grado di pretezione IP65. Serrare bene il pressacavo di uscita cavo sul cavo stesso. • H and H1 plug sensors are not supplied with female connector;...

 Open the catalog to page 2
CONNECTORS-4

MORE THAN SENSORS via G. Leopardi,5 - 20065 Inzago (Milano) ITALY email: [email protected]

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.