*mydirectindustry

SAF 30 Ultimate

Product catalog summary

Key Features

High environmental and impact resistance
Long open time
Metal bonding capability
Non-sag application suitable for vertical surfaces
Maintains toughness even after ageing
Minimal surface preparation required

Description

The SAF range consists of patented methacrylate adhesives designed for bonding various dissimilar substrates such as metals, plastics, and composites. These adhesives offer structural bonding with flexibility and fatigue resistance, suitable for aggressive environments and extreme temperatures.

Range of Application

SAF 30 Ultimate is recommended for substrates including steel, galvanized steel, stainless steel, powder-coated steel, aluminium, PVC, PMMA, PC, ABS, and PS.

Product Characteristics

System: Two-component, 4:1 volume ratio
Polymerization: Room temperature
Operating temperature: -40°C to 200°C
Elongation: 200%

Adhesive Properties

Appearance: Grey
Density: 0.98
Viscosity at 23°C: A: 40-802, B: 30000-600001
Type: Non-sag

Curing Properties

Open time: 8 minutes
Fixture time at 24°C: 13 minutes
Full cure: 24 hours

Mechanical Properties

Lap shear strength: 13.0 MPa
Tensile strength at break: 6-9 MPa
Tensile modulus: 100-200 MPa
Hardness: Shore D 55-60
Elongation at break: 200%

Weathering and Ageing Resistance

Demonstrates strong resistance to weathering and ageing, maintaining lap shear strength after ageing cycles.

Surface Preparation

Use AEC T700 for cleaning metal surfaces. Plastics may require simple cleaning or sanding for better performance.

Precautions

Contains methacrylate monomers; flammable
Store in a cool place away from heat
Use in a well-ventilated area
Avoid contact with skin and eyes
Read Safety Data Sheet before use

Application

Optimal results at room temperature (12°C to 35°C). Follow product guide or contact Bostik for assistance.

Storage

Shelf life of 9 months in unopened packaging. Store in a dry place at 15°C to 30°C.

Packaging

Available in various sizes: 50mL, 415mL cartridges, 20L pails, 200L drums. Specific mixers required for different cartridge sizes.

Limited Warranty

Bostik provides a limited warranty for replacement or refund. Liability for damages is limited as per law. Suitability testing is the buyer's responsibility.

Contact Information

Bostik Hotline: +33 5 57 26 15 15
AEC Polymers, 6 Rue Guy Pellerin, 33114 Le Barp, France

Catalog excerpts

ADHESIVE PROPERTIES PHYSICAL PROPERTIES KEY FEATURES - High environmental and impact resistance - Long open time - Metal Bonding - Non-sag, application on vertical surfaces - Permanent toughness even after ageing - Minimal surface preparation DESCRIPTION The SAF range is made of patented methacrylate adhesives and shows unmatched performance in term of resistance and flexibility. These adhesives have been designed for bonding a wide range of dissimilar substrates including metals and plastics as well as composite materials for industrial applications. The outstanding properties of the SAF range allow structural bonding while keeping flexibility and fatigue resistance. The SAF range products have been developed to resist the most aggressive environments and extreme temperatures. It shows unprecedented results facing weathering and ageing. RANGE OF APPLICATION The SAF 30 Ultimate is recommended for the followed substrates: CURING PROPERTIES PRODUCT CHARACTERISTICS PRODUCT CHARACTERISTICS MECHANICAL PROPERTIES

Open the catalog to page 1

NOTES 1. Brookfield viscosity (mPa.s) mobile T-D at 10trm 2. Shear viscosity (Pa. s) 1-2s-1 3. With ISO 527-IA SURFACE PREPARATION Use AEC T700 to remove grease, loose contamination or poorly adhering oxides from metal surfaces. Most plastics require a simple cleaning before bonding. Some may require sanding for better performances. PRECAUTIONS Adhesive contains methacrylate monomers and is flammable. Materials must be stored in cool place away from sources of heat. During the polymerization, the chemical reaction causes a typical smell, please use the product in a well-ventilated area. When...

Open the catalog to page 2

SAF 30 Ultimate

SAF 30 Ultimate

Catalog excerpts

All AEC POLYMERS S.A.S. catalogs and technical brochures