*mydirectindustry

SAF 30 MIB

Product catalog summary

Key Features

Metal bonding with high temperature and impact resistance.
Non-sag application suitable for vertical surfaces.
Maintains toughness even after ageing.
Minimal surface preparation required.
Long open time for application.

Description

The SAF range consists of patented methacrylate adhesives designed for bonding dissimilar substrates such as metals, plastics, and composites. These adhesives offer structural bonding with flexibility and fatigue resistance, suitable for aggressive environments and extreme temperatures.

Range of Application

Recommended substrates include steel, stainless steel, powder-coated steel, aluminium, polyester, and various plastics like ABS, PVC, and PMMA.

Product Characteristics

Two-component system with a 10:1 volume ratio.
Polymerization occurs at room temperature.
Operating temperature range: -40°C to 200°C.
Elongation: 60%.

Adhesive Properties

Appearance: Off White.
Density: 1.02.
Viscosity: A: 90,000-160,000 mPa.s, B: 40,000-80,000 mPa.s.
Non-sag type.

Curing Properties

Open time: 6-8 minutes.
Fixture time at 24°C: 15-30 minutes.
Full cure: 24 hours.

Mechanical Properties

Lap shear strength: 17 MPa.
Tensile strength at break: 10-12 MPa.
Tensile modulus: 150-250 MPa.
Hardness: Shore D 60.
Elongation at break: 60%.

Weathering and Ageing Resistance

Demonstrates strong resistance to weathering and ageing, maintaining lap shear strength across various substrates.

Surface Preparation

Use AEC T700 for cleaning metal surfaces. Plastics may require simple cleaning or sanding.

Precautions

Contains methacrylate monomers; flammable and should be stored away from heat.
Use in well-ventilated areas due to exothermic reaction during mixing.
Avoid contact with skin and eyes; seek medical attention if necessary.

Application

Optimal results at room temperature (12°C to 35°C). Follow product guide or consult Bostik for specific instructions.

Storage

Shelf life of 9 months in unopened packaging, stored between 15°C and 30°C.

Packaging

Available in various sizes including cartridges, pails, and drums. Specific mixers required for different cartridge sizes.

Limited Warranty

Bostik provides a limited warranty for product replacement or refund. Liability for damages is limited as per legal allowances.

Contact Information

Bostik Hotline: +33 5 57 26 15 15. AEC Polymers, 6 Rue Guy Pellerin, 33114 Le Barp, France.

Catalog excerpts

ADHESIVE PROPERTIES PHYSICAL PROPERTIES KEY FEATURES - Metal Bonding - High temperature and impact resistance - Non-sag, application on vertical surfaces - Permanent toughness even after ageing - Minimal surface preparation - Long open time DESCRIPTION The SAF range is made of patented methacrylate adhesives and shows unmatched performance in term of resistance and flexibility. These adhesives have been designed for bonding a wide range of dissimilar substrates including metals and plastics as well as composite materials for industrial applications. The outstanding properties of the SAF range allow structural bonding while keeping flexibility and fatigue resistance. The SAF range products have been developed to resist the most aggressive environments and extreme temperatures. It shows unprecedented results facing weathering and ageing. The SAF 30 MIB is recommended for the followed substrates: CURING PROPERTIES PRODUCT CHARACTERISTICS PRODUCT CHARACTERISTICS

Open the catalog to page 1

NOTES 1. Brookfield viscosity (mPa.s) mobile T-D at 10trm 2. Brookfield viscosity (mPa.s) mobile RV7 @10trm 3. With ISO 527-IA 4. ISO 4587 SURFACE PREPARATION Use AEC T700 to remove grease, contamination or poorly adhering oxides from metal surfaces. Most plastics require a simple cleaning before bonding. Some may require sanding for better performances. PRECAUTIONS Adhesive contains methacrylate monomers and is flammable. Materials must be stored in cool place away from sources of heat. During the polymerization, the chemical reaction causes a typical smell, please use the product in a well-ventilated...

Open the catalog to page 2

SAF 30 MIB

SAF 30 MIB

Catalog excerpts

All AEC POLYMERS S.A.S. catalogs and technical brochures