*mydirectindustry

SAF 150-15

Product catalog summary

Key Features:

Excellent environmental resistance and permanent toughness even after ageing.
Minimal surface preparation required and fast curing time.
High elongation and impact resistance, suitable for vertical surfaces.

Description:

The SAF range consists of patented methacrylate adhesives designed for bonding dissimilar substrates like metals, plastics, and composites. These adhesives offer structural bonding with flexibility and fatigue resistance, performing well in aggressive environments and extreme temperatures.

Range of Application:

Recommended substrates include various metals (steel, aluminum, stainless steel), plastics (ABS, PC, PMMA, PVC), and glass.

Product Characteristics:

Two-component system with a 10:1 volume ratio.
Operates between -40°C to 150°C with 150% elongation.

Adhesive Properties:

Resin and hardener have off-white appearance and specific viscosities.
Curing properties include a 7-minute open time and 15-minute fixture time at 24°C, with full cure in 24 hours.

Mechanical Properties:

Lap shear strength of 16.0 MPa and tensile strength at break between 8.0 – 10 MPa.
Hardness rated at Shore D 60-65 with 150% elongation at break.

Weathering and Ageing Resistance:

Demonstrates increased lap shear strength after ageing cycles across various substrates.

Surface Preparation:

Use AEC T700 for cleaning metal surfaces; some plastics may require sanding.

Precautions:

Contains flammable methacrylate monomers; use in well-ventilated areas.
Avoid skin and eye contact; follow safety data sheet instructions.

Application:

Optimal results at room temperature (12°C to 35°C) without post-curing.

Storage:

Shelf life of 9 months in unopened packaging, stored between 15°C and 30°C.

Packaging:

Available in various sizes, requiring specific mixers for different cartridge sizes.

Limited Warranty:

Bostik provides a limited warranty with specific terms, emphasizing the buyer's responsibility to test product suitability.

Contact Information:

For assistance, contact Bostik Hotline or visit their website.

Catalog excerpts

Bostik . ■ smart adhesives ADHESIVE PROPERTIES Excellent environmental resistance Permanent toughness even after ageing Minimal surface preparation Fast curing time High elongation and impact resistance Non-sag, application on vertical surfaces DESCRIPTION The SAF range is made of patented methacrylate adhesives and shows unmatched performance in term of resistance and flexibility. These adhesives have been designed for bonding a wide range of dissimilar substrates including metals and plastics as well as composite materials for industrial applications. The outstanding properties of the SAF range allow structural bonding while keeping flexibility and fatigue resistance. The SAF range products have been developed to resist the most aggressive environments and extreme temperatures. It shows unprecedented results facing weathering and ageing. RANGE OF APPLICATION The SAF 150-15 is recommended for the followed substrates:

Open the catalog to page 1

NOTES 1. Brookfield viscosity (mPa.s) mobile T-D at 10trm 2. Brookfield viscosity (mPa.s) mobile RV7 @10trm 3. With ISO 527-IA 4. ISO 4587 SURFACE PREPARATION Use AEC T700 to remove grease, contamination or poorly adhering oxides from metal surfaces. Most plastics require a simple cleaning before bonding. Some may require sanding for better performances. PRECAUTIONS Adhesive contains methacrylate monomers and is flammable. Materials must be stored in cool place away from sources of heat. During the polymerization, the chemical reaction causes a typical smell, please use the product in a well-ventilated...

Open the catalog to page 2

SAF 150-15

SAF 150-15

Catalog excerpts

All AEC POLYMERS S.A.S. catalogs and technical brochures