Technical Specifications TrueTemp™ TCU Series Water Temperature Control Units provide highly accurate control for production applications requiring a continuous supply of temperature-controlled water. Innovative design promotes turbulent water flow to maximize heat transfer performance. High flow pumps with 32°F to 250°F (0°C to 121°C) setpoint operating range. The cast-and-flange design reduces connection points by 40% while including high-efficiency pumps that offer higher flow rates at lower pressures. These highly efficient products maintain temperatures to within 1°F of setpoint,allowing for tighter temperature control and improved throughput. Standard Features • Compact design with easy-access side panels for rapid maintenance • Programmable auto vent sequence to automatically vent air from the system at start-up • Independent high temperature safety thermostat to protect from heater overload • Motor branch circuit overcurrent/ overlead protection • Integrated cooling solenoid valves for efficient unit cooling • Forward-facing liquid-filled To and From Process pressure gauges • Non-fused lockable rotary through door disconnect • 9kW dual stage immersion heater with IEC contactors • Operator friendly PID temperature controller with Process and Setpoint LED readouts and straightforward unit performance data • Graphic control panel with indicator and warning status lights • Adjustable low supply water pressure switch; 16 psig (1.1 bar) • 150 psig (10.3 bars) pressure relief valve • SICB/carbon pump seal to maximize pump life • 0.75" water supply connection, 1.5" process connections; valve size matches drain size Optional Features • Advanced Controller • Compact units offer 12 kW, 18 kW, or 24 kW heater options • Upright units offer 9 kW through 24 kW plus 36 kW or 48 kW heater options • Maintained START/STOP switch • Closed loop heat exchanger, model varies with unit sizes • General fault audio/visual alarm to alert operators of unit issues • Quick cool switch w/3216, w/Acv. Ctr. for rapid unit cooling • Pressure regulator/relief valve for water supply • Auto system water purge • Y-strainer to protect unit from high particulate fluid • Multi-zone capable with factory installed wiring and/or piping. Not available in all configurations • 300°F (149°C) operations, includes silicon carbide/silicon carbide seal (requires 55 psig (379 kPa/3.8 bar) water supply pressure) 2900 South 160th Street, New Berlin, WI 53151 | P: 1.262.641.8600 E: [email protected] W:

TrueTemp™ SERIESProduct Diagrams TrueTemp Upright TrueTemp Compact Height 29 (73) SpecificationsTrueTemp Compact Model 2900 South 160th Street, New Berlin, WI 53151 | P: 1.262.641.8600 E: [email protected] W: www.aecinternet.com Rev 07.14.2016