PROVIDING SOLUTIONS, NOT JUST EQUIPMENT PNEUMATIC CONVEYORS STATIONARY PICK-UP TUBE Performance proven AEC Pneumatic Conveyors have successfully automated thousands of machine side loading and grinder unloading operations. They offer processors unusual operating economy and low initial equipment cost for moving free-flowing granular materials at rates up to 1900 lbs.(864 kg/hr) pounds per hour. Powered by compressed air, AEC Pneumatic Conveyors feature a perfected venturi design that uses plant air sparingly. The 500 Series, for example, uses only 7 CFM (198 ltr/m.) of compressed air. Models 500, 506, 1000, 1006, 2002, and 2006 are fitted with stationary vertical pick-up tubes. All pick-up tubes are held in place by a flexible grommet to speed container changes. AEC Pneumatic Conveyors are available as freestanding machine side loaders, granulator unloaders (1050 Series) and horizontal pick-up conveyors. The 500 Series is designed to convey 300 to 500 lbs. (136-227 kg) per hour over short distances. The 1000 Series is recommended for larger material particle sizes and conveying rates up to 1000 lbs. (455 kg) per hour. The 2000 Series will convey up to 1900 lbs. (864 kg) per hour. Some models feature automatic conveying controls which monitor material supply. If material is needed, the unit conveys until the machine hopper is full.

HORIZONTAL PICK-UP CONVEYORS Model 2000 and 2001 feature a horizontal material pick-up arrangement to remove virgin or regrind materials from the bottom of surge bins. GRANULATOR UNLOADING The AEC Series 1050 offers low cost granulator unloading of material with particle sizes up to 3/8" (9.5 mm). They include the manually operated Model 1050, and granulator interlocked Model 1052. These compact units provide a constant removal of granulate from collection bins on granulators and auger grinders. FILTER CONE ATTACHMENT An optional filter cone attachment is available for all AEC Pneumatics to help...