ECU Series
1 /2Pages

ECU Series

ECU Series
1 /2Pages

Catalog excerpts

ECU Series-1

Material Handling | Process Cooling | Temperature Control | Size Reduction Technical Specifications ECU Series Water Temperature Control Units utilize a robust design for even the most demanding applications. These highly featured products provide a leaving water temperature up to 250°F (0121°C) and offer an option to reach up to 300°F (148.9°C) leaving water temperature. The tight temperature control of ±1.5°F (0.8°C) allows for more efficient production through increased temperature consistency and control. With a wide range of communication options, the AEC ECU is the right choice for your application needs. Features Standard Features Optional Features • 1/16 DIN temperature controller with Process and Setpoint LED readouts • Graphic control panel with indicator and warning lights • 300°F operation; includes silicon carbide seal (requires 55 psi minimum water supply pressure) • Compact cabinet with 1.5” casters • Manual bypass • Immersion heater with IEC contactor • Pressure regulator/relief valve for water supply, shipped loose • Integrated motor circuit protector • Pressure gauges (shipped loose) • 3/4” water supply, 1.5” process connections, valve size matches drain size • 150 psi (10.3 bar) pressure relief valve • Quick cool switch • Independent high temperature safety thermostat • 1/2” and 3/4” slow-closing cooling solenoid valve • Adjustable low supply water pressure switch, factory set at 16 psig (1.1 bar) • Auto system water purge (mold purge), shipped loose • 3/4 hp through 7.5 hp cast iron process pumps with SICB/ carbon mechanical seals • Remote start/stop • Hammer arrestor • General fault audible/visual alarm • Automatic vent sequence • 1 year warranty on parts and labor at the factory • Ten foot power cord; no plug, shipped loose • 3 year warranty on controller • Rotary through-the-door disconnect switch • UL/cUL-listed subpanel 2900 South 160th Street, New Berlin, W

 Open the catalog to page 1
ECU Series-2

Product Diagrams Specifications Pump HP (kW) 2900 South 160th Street, New Berlin, WI 53151 | P: 1.262.641.8600 E: [email protected] W: www.aecinternet.com Rev 07.08.2016

 Open the catalog to page 2

All AEC, Inc. - ACS Group catalogs and technical brochures

  1. T50-Series

    2  Pages

  2. AF1000 Series

    2  Pages

  3. 30RB Series

    2  Pages

  4. AF Series

    2  Pages

  5. TDV Series

    2  Pages

  6. 30RAP Series

    2  Pages

  7. 7 Series BTP

    4  Pages

  8. A3 SERIES

    2  Pages

  9. AVL series

    2  Pages

  10. GH-F

    2  Pages

  11. AF1000

    2  Pages

  12. BD series

    8  Pages

  13. Blending

    12  Pages

  14. Drying Brochure

    12  Pages

  15. PolyMag?

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.