CORRUGATED SILOS MATERIAL HANDLING WHITLOCK • MATERIAL HANDLING BOLTED, GALVANIZED, CORRUGATED SILOS AEC Silos provide an efficient method of storing bulk quantities of material for process. Not only does bulk storage ensure that the materials needed to keep an operation running are always there, it also provides a way to buy raw material at less cost. Minimizing waste, contamination, and freeing up valuable floor space are additional advantages of the AEC bulk storage system. AEC Silos are constructed from an FDA approved galvanized metal which provides a maintenance free surface. The silos are sealed with FDA approved crosslinked polyethlene foam sealant to prevent water infiltration. Various capacities, methods of fill and discharge are available. Accessories and safety equipment to OSHA specifications are available as well. STANDARD FEATURES • FDA Approved Galvanized Coating, Interior and Exterior • 22" Top Access Hatch • FDA, HDPE, Foam Seal, Double Row • Perimeter Railing and Toe Plate (10° Roof Silos) • Manguard Assy, 8’ Dia. Expanded Metal Level Platform (30° Roof Silos) • All Accessories are Galvanized or Aluminum • Bolted Construction OPTIONAL FEATURES • Vacuum discharge packages • Air filter kits • Gravity discharge chutes • Level indication • Corrugated Sidewalls, Smooth Wall Hopper Section and Roof Section • Silo skirting packages with walk-in door • Air fill kits • 120 MPH Wind, Exposure C, I=1.0 per ACSE 7-98 • Ladder and cage assemblies • Roof ladders and safety railings (30º roof silos) • Manguards (30º roof silos) NOTE: Verify local standards and code requirements, i.e. IBC Standard, P.E. Stamp, etc.

CORRUGATED SILOS SPECIFICATIONS Type 10º 30º ANCHOR BOLT DETAIL Every AEC bolted, corrugated silo that we install is mounted to the concrete pad foundation by the Tru-Bolt anchoring system. This eliminates the need for setting bolts in wet concrete before the silo is erected. The Tru-Bolt anchor allows you to erect the silo, position it, and then drill the anchor holes and secure the anchors. With this method, the anchors are always properly located. The Tru-Bolt anchor has a 7800 lb. pull-out strength, exceeding the strength of an ordinary mounting bolt. MATERIAL HANDLING Hopper cone FOUNDATION...