*mydirectindustry

30RAP Series

Product catalog summary

Overview: The 30 RAP Series Outdoor Central Chillers are designed for efficient process cooling, particularly in space-constrained environments. These chillers are air-cooled and work with an in-plant reservoir and pumping system. They are available in capacities ranging from 10 to 60 tons and are delivered installation-ready, fully tested, and weatherproofed.

Specifications: The chillers come in 11 standard models with various cooling capacities. They feature hermetic scroll compressors, direct expansion type brazed plate evaporators, and aluminum fin/copper tube condensers. The standard ambient operation range is from -20°F to 125°F, with standard leaving water temperature setpoints from 40°F to 70°F. Models 035 to 060 have two independent circuits.

Standard Features: Key features include R-410a refrigerant, hot gas bypass, heavy-gauge galvanized steel frame, and a range of safety features such as high and low refrigerant protection, freezestat, and motor overload protection. A one-year warranty on parts and labor is included.

Optional Features: Options include a non-fused disconnect switch, various operating voltages, and an additional four-year compressor warranty. The AWX Winter Kooler add-on is available for cost savings.

Dimensions and Capacities: The document provides detailed dimensions and shipping weights for each model, as well as cooling capacities, energy ratings, chilled water flow rates, and compressor specifications. For example, the 30RAP 010 model has a cooling capacity of 11.2 tons and an energy rating of 10.9 EER.

Catalog excerpts

Material Handling | Process Cooling | Temperature Control | Size Reduction Technical Specifications 30 RAP Series Outdoor Central Chillers provides an efficient, space saving system for process cooling. If your plant space is cramped, the outdoor chiller may be the ideal solution for your process cooling needs. The outdoor air-cooled chiller works in conjunction with an in-plant reservoir and pumping system. Models are available in capacities from 10 to 60 tons. Sterling systems are delivered installation-ready, full factory tested, pre-piped, pre-wired and completely weatherproofed. With 11 standard models and a comprehensive range of cooling capacities, there's a AEC Air-Cooled Central Chilling System available to meet your individual requirements. Standard Features • Hermetic scroll compressor(s) • Direct expansion type brazed plate evaporator(s) • Aluminum fin/copper tube condenser with direct drive reinforced polymer fans • R-410a refrigerant • Hot gas bypass • Wind baffles may be required for below 20°F operation • Standard ambient operation from -20°F to 125°F (-29°C to 49°C). (Glycol may be required) • Standard leaving water temperature setpoints are from 40°F to 70°F (4.4° to 21°C). Other setpoint ranges are available upon request. (consult factory) • Two independent circuits on 035 to 060 • Heavy-gauge galvanized steel frame painted cabinet • Refrigeration circuit(s) include filter dryer, sight glass, and thermal expansion valve • Safeties include: high and low refrigerant, freezestat, phase loss, motor overload, and reverse rotation of the compressor • 1 year warranty on parts and labor Optional Features • Non-fused disconnect switch • 208/3/60, 230/3/30, or 575/3/60 operating voltages • 4 year additional compressor warranty (compressor warranty covers the compressor parts only from years 2 through 5). Requires factory start-up • AWX Winter Kooler is an additional system add-on available for substantial savings 2900 South 160th Street, New Berlin, WI 53151 | P: 1.262.641.8600 E: [email protected] W: www.aec

Open the catalog to page 1