*mydirectindustry

MSH

MSH

Product catalog summary

Overview: This document provides technical specifications for two models of sweepers, MSH 070 and MSH 150, manufactured by Aebi Schmidt. It includes detailed information on hopper capacity, sweeping unit dimensions, water and drive systems, and other technical parameters.

Hopper Specifications:

MSH 070: Tank volume of 0.7 m³, dumping height of 1,500 mm.
MSH 150: Tank volume of 1.5 m³, dumping height of 1,800 mm.

Sweeping Unit:

Disc Brush: MSH 070 has a diameter of 760 mm and speed of 100 1/min; MSH 150 has a diameter of 900 mm and speed of 160 1/min. Both use steel material.
Sweeping Width: Ranges from 1,600 - 1,900 mm for MSH 070 and 1,900 - 2,200 mm for MSH 150.
Roller Brush: MSH 070 has a diameter of 690 mm and length of 950 mm; MSH 150 has a diameter of 860 mm and length of 1,000 mm.

Water System:

Total water volume is 200 l for MSH 070 and 500 l for MSH 150.
Spraying levels are consistent at 3.4 bar with varying flow rates.

Drive System:

Both models use PTO shaft and power hydraulics with a PTO shaft speed of 540.
Hydraulic system pressure is 150 bar for MSH 070 and 160 bar for MSH 150.

Speed and Dimensions:

Transport speed is 25 km/h to 40 km/h, with a sweeping speed of 12 km/h for both models.
Dimensions vary with MSH 070 being 3,220 mm in length and MSH 150 being 4,580 mm.

Weights:

Empty weight is approximately 800 kg for MSH 070 and 1,300 kg for MSH 150.
Permitted total weight is 1,500 kg for MSH 070 and 3,000 kg for MSH 150.

Additional Information: The document notes that technical data is subject to change and illustrations are not binding.

Catalog excerpts

MSH Sweeper Technical data MSH 070 Hopper Tank volume Dumping height tilt discharge Sweeping unit Disc brush diameter Disc brush speed Brush material Sweeping width Roller brush diameter Roller brush length Roller brush speed Water system Total water volume Water spray nozzles per disc brush PTO shaft / Power hydraulics PTO shaft / Power hydraulics Drive system Drive PTO shaft Power Hydraulics Towing Vehicle Hydraulic system Hydraulic tank volume Flow rate approx. Speed Transport speed Sweeping speed permanent use Dimensions Length Technical data | Detailed information at www.aebi-schmidt.com

Open the catalog to page 1

Weights Empty weight of the basic unit approx. Permitted total weight www.aebi-schmidt.com © Aebi Schmidt Group Aebi Schmidt Holding AG CH-8050 Zurich All rights reserved. Technical data is subject to change. Illustrations are not binding. Errors and amendments excepted.

Open the catalog to page 2

MSH

MSH

Catalog excerpts

All Aebi Schmidt Holding AG catalogs and technical brochures