*mydirectindustry

MFH 550

Product catalog summary

Overview: The MFH 550 is a sweeper available in two configurations: a 2-brush system and a 3-brush system. Both systems share many specifications but differ in sweeping width and dimensions.

Hopper: Both systems have a tank volume of 5 m³, a tilt angle of 55°, and a dumping height range of 1,100 mm to 1,820 mm for high discharge.

Sweeping Unit: The disc brush diameter is 900 mm with a speed of 140 1/min. The brush material options include steel, plastic, or a mixfill. The sweeping width is 2,200 mm for the 2-brush system and extends to 3,550 mm with the 3rd brush.

Suction Fan: The maximum air flow rate is 14,000 m³/h with a vacuum of 850 mm and a speed of 3,400 1/min.

Water System: The total water volume is 685 liters, with a fresh water pump operating at 3.4 bar and 15 l/min. The water tank is made of polyethylene.

Drive System: Both systems use a FCA R756 engine with 6 cylinders, Euro 6c emission standards, and an AdBlue + SCR-Kat after-treatment system. The engine displacement is 4,455 cm³, delivering 120 kW (163 HP) and 500 Nm of torque. The fuel tank capacity is 110 liters, and the AdBlue tank is 14 liters.

Steering: The steering angle for the front axle is 68°, with a turning circle of 7,250 mm wall-to-wall and 5,950 mm kerb-to-kerb.

Speed: Transport speeds range from 25 km/h to 50 km/h, while sweeping speed for permanent use is 12 to 18 km/h.

Dimensions: The length without the 3rd brush is 4,450 mm, extending to 5,487 mm with it. The width without the brush is 1,810 mm, and the height with a beacon is 2,707 mm. The wheelbase is 1,850 mm, with front and rear track widths of 1,600 mm and 1,310 mm, respectively.

Weights: The empty weight of the basic unit is approximately 5,500 kg, with a permitted total weight of 11,500 to 12,100 kg.

Catalog excerpts

MFH 550 Sweeper Technical data MFH 550 | 2 brush system Tank volume Tilt angle Dumping height tilt discharge Dumping height high discharge Sweeping unit Disc brush diameter Brush material steel / Plastic / Mixfill steel / Plastic / Mixfill Sweeping width Disc brush speed Sweeping width with 3rd brush Suction fan Max. air flow rate (free flow) Max. approx. vacuum Water system Total water volume Fresh water pump Water tank material Drive system - auxiliary engine 2 Engine type Number of cylinders Exhaust emission After treatment system Fuel Torque Fuel tank Technical data | Detailed information at www.aebi-schmidt.com

Open the catalog to page 1

MFH 550 | 2 brush system AdBlue tank Steering Steering angle front axle Ø Turning circle wall/wall Ø Turning circle kerb/kerb Speed Transport speed Sweeping speed permanent use Dimensions Length without 3rd brush Length with 3rd brush Width without brush Height with beacon Track width front Track width rear Weights Empty weight of the basic unit approx. Permitted total weight www.aebi-schmidt.com © Aebi Schmidt Group Aebi Schmidt Holding AG CH-8050 Zurich All rights reserved. Technical data is subject to change. Illustrations are not binding. Errors and amendments excepted.

Open the catalog to page 2

MFH 550

MFH 550

Catalog excerpts

All Aebi Schmidt Holding AG catalogs and technical brochures