*mydirectindustry

Cleango 500

Product catalog summary

Overview: The Cleango 500 is a street sweeper available in two configurations: a 2-brush and a 3-brush model. Both models share many specifications but differ in sweeping width and dimensions due to the additional brush.

Hopper: Both models feature a tank volume of 5 m³, a tilt angle of 55°, and a dumping height ranging from 1,100 mm to 1,820 mm.

Sweeping Unit: The disc brush diameter is 900 mm with a speed of 140 1/min. The sweeping width is 2,200 mm for the 2-brush model and extends to 3,500 mm with the 3rd brush in the 3-brush model. Brush materials include steel, plastic, or a mixfill.

Suction Fan: Both models have a maximum air flow rate of 14,000 m³/h and a vacuum of 850 mm, operating at a speed of 3,400 1/min.

Water System: The fresh water volume is 685 liters, with a pump pressure of 3.4 bar and a flow rate of 15 l/min. The water tank is made of polyethylene.

Drive System - Auxiliary Engine: Both models are powered by an FCA R756 engine with 6 cylinders, meeting Euro 6c emission standards. The engine delivers 120 kW (163 HP) and 500 Nm of torque, using diesel fuel with a 110-liter tank capacity. An AdBlue tank of 14 liters is included for emissions treatment.

Steering: The front axle steering angle is 68°, with a turning circle of 7,250 mm wall-to-wall and 5,950 mm kerb-to-kerb for the 2-brush model, and 8,100 mm wall-to-wall for the 3-brush model.

Speed: Transport speeds range from 25 km/h to 50 km/h, while sweeping speeds for permanent use are 12 km/h or 18 km/h.

Dimensions: The 2-brush model measures 4,450 mm in length, while the 3-brush model extends to 5,487 mm. Both models have a width of 1,810 mm and a height of 2,707 mm with a beacon.

Weights: The empty weight of the basic unit is approximately 5,500 kg, with a permitted total weight of 11,500 kg or 12,100 kg.

Catalog excerpts

Cleango 500 Sweeper Technical data Cleango 500 | 2-Brush Tank volume Tilt angle Dumping height tilt discharge Dumping height high discharge Sweeping unit Disc brush diameter Brush material steel / Plastic / Mixfill steel / Plastic / Mixfill Sweeping width Disc brush speed Sweeping width with 3rd brush Suction fan Max. air flow rate (free flow) Max. approx. vacuum Water system Fresh water volume Water tank material Fresh water pump Drive system - auxiliary engine Engine type Number of cylinders Exhaust emission After treatment system Fuel Torque Fuel tank Technical data | Detailed information at www.aebi-schmidt.com

Open the catalog to page 1

Cleango 500 | 2-Brush AdBlue tank Steering Steering angle front axle Ø Turning circle wall/wall Ø Turning circle kerb/kerb Speed Transport speed Sweeping speed permanent use Dimensions Length without 3rd brush Length with 3rd brush Width without brush Height with beacon Track width front Track width rear Weights Empty weight of the basic unit approx. Permitted total weight www.aebi-schmidt.com © Aebi Schmidt Group Aebi Schmidt Holding AG CH-8050 Zurich All rights reserved. Technical data is subject to change. Illustrations are not binding. Errors and amendments excepted.

Open the catalog to page 2

Cleango 500

Cleango 500

Catalog excerpts

All Aebi Schmidt Holding AG catalogs and technical brochures