Packetarium XLe Ultra High Performance Blade Server with 100G Switched Midplane Features Highest CPU and I/O density platform in the Packetarium XL family Up to 12 CPU blades with single Intel® Xeon® Processor E5-2600 v3/v4 Up to 2Tbps switching capacity with 100Gbps midplane connectivity per blade Flexible I/O configurations with up to 6 PHY Mezzanine Modules (PMMs) which can host 1x100GbE, 3x40GbE, 2x40GbE, or 8x10GbE ports each Broadcom FastPath v8.2 and Advantech Load Balancer (L2) supports Enhanced platform management features for increased RASUM Hot swappable and redundant AC/DC and DC/DC PSU options Front-to-rear push-pull cooling mode. Six rear pluggable, hot swappable fan modules with fan speed control Optional SATA storage devices on the CPU blade and on the system mount Optional LCD module support RoHS COMPLIANT 2002/95/EC Introduction Advantech’s Packetarium XLe series meets the higher levels of performance and throughput needed by next generation enterprise and telecom applications, offering new, cost-effective ways to scale-out compute density using Intel® Architecture processors distributed across high-speed switched backplanes. The system is optimized for maximum CPU and network I/O density, enabling faster packet handling to meet the increased data throughput rates needed in enterprise networking and in telecom middle boxes. It is ideal for Network Intelligence deployments requiring accelerated packet processing performance on 10GbE, 40GbE and 100GbE ports in applications such as high-end network security, policy control and traffic analysis. The first model in the Packetarium XLe for Enterprise series, the PAC-4010 fits in just 4RU and reaches the performance levels typically only found in specialized ATCA or proprietary network processor-based solutions, but at a fraction of the cost. The platform uses common IP and building blocks to bring greater cost efficiencies and economies of scale which can then be passed on to customers. The PAC-4010, packs up to 840 Gbps of I/O, up to 2 Tbps of switching capacity and up to 12 Intel® Xeon® Processor E5-2600 v3/v4 CPUs in just 4RU. The integrated switch & system control module is based on the high capacity Broadcom StrataXGS® Trident II/II+ switch family managed by an Intel® Atom™ Processor C2000 and provides six hot swappable PHY mezzanine module (PMM) slots to accommodate a wide choice of 10 GbE, 40 GbE and 100 GbE ports with optional LAN bypass support. Many different payloads can be integrated into Advantech Packetarium XLe systems and configured to address a broad range of industry applications. For more details on integrating a specific configuration please contact your local sales representative. Specifications CPU NOTE1 Processor System External I/O Modules & Interface Technology AC Input DC Input PSU cooling Output DC voltage Output Current rating Power Consumption All product specifications are subject to change without notice 12 CPU blades, Single Intel® Xeon® Processor E5-2600 v3/v4 series on each CPU blade Up to 1.68 Tbps data plane switching capacity, Up to 320Gbps control plane switching capacity, Up to 100Gbps connectivity per blade Flexible I/O with up to 6 PHY Mezzanine Modules (PMMs) which can host 1x100GbE, 3x40GbE, 2x40GbE, or 8x10GbE ports each Maximum 120Gbps traffic for each PHY Mezzanine Module (PMM) 4x SFP+ for data plane, 4x SFP+ and 1x QSFP+ for control plane, 2x GbE for system management 2x RS-232 (one with RJ45 port for switch LMP and the other with miniUSB port for ShMC) 2x USB 2.0 port connect to switch LMP Up to 2x system storages (2.5" SSD or HDD) and 2x on-board m-SATA storages on the switch board Up to 2x m-SATA M.2 SSD on each CPU blade Six Rear pluggable, hot swappable fan modules with PICMG compliant fan speed control Up to four redundant power supply units with separate AC inlets. AC 200~240V, 50~60Hz, with 2+2 and N+1 power redundancy options (max output 3600W) AC 100~127V, 50~60Hz, with N+1 power redundancy (max output 3000W) Up to four redundant power supply units with separate DC inlets. DC -40V - -60V, 55A, with 2+2 and N+1 power redundancy options (max output 3600W) Self cooled +12V Maximum 148A@ +12V per PSU Maximum 2A@ +12VSB per PSU 3100W (with configuration: 12x CPU blades with 4x 2133MHz 16GB DDR4 memory and 2x M.2 SSD each blade, 6x single port 100GbE PM

PAC-4010 Specifications (Cont.) Shelf management Accessibility Physical Characteristics BMC IPMI Interfaces Sensors Front Rear Dimensions (H x W x D) Weight Temperature Humidity Altitude Acoustic PICMG Safety & EMC ARM 9 based controller (400MHz) IPMI 2.0 based on Advantech IPMI Core RMCP, SSH, SNMP, CLI, and serial interfaces FRU presence, fan health, PSU health, temperatures, input voltages CPU blades, PMMs, 2.5" SSDs or HDDs Fan modules, AC or DC PSU’s 4U x 19" x 686 mm 63kg (system weight with full configuration (including 12x CPU blades and 6x PMMs)) Operating Non-operating 0 ~ 40° C (32...