Catalogs >
ADVANTECH >
EKI-7708G-4FP EKI-7708G-4FPI

EKI-7708G-4FP EKI-7708G-4FPI
2Pages

Catalog excerpts

4G+4G SFP Port Gigabit Managed Redundant Industrial PoE Switch Features 4 x Gigabit Ethernet ports + 4 x SFP ports Support 4 x IEEE 802.3at/af PoE ports for PD demands Redundancy: X-Ring Pro (ultra-high-speed recovery time, <20 ms), RSTP/STP (802.1w/1D) IXM function for fast deployment Security Pack with 802.1X, ACL, RADIUS, TACACS+, MAB Authentication, SNMPv3, HTTPS, SSH, and SFTP Management: SNMP v1/v2c/v3, WEB, Telnet, standard MIB, private MIB Supports NMS for easy and visualized to monitor and manage network remotely Dual 48 VDC power input and 1 x relay output Introduction The EKI-7708G-4FP/4FPI support 4 Gigabit IEEE 802.3 af/at PoE ports and 4 SFP (mini-GBIC) ports. These switches can provide up to 30 W per port to fulfill high-power-consumption powered device requirements. They are embedded with Advantech’s IXM function, which can benefit users with fast deployment while saving a substantial amount on engineering time and costs. The EKI-7708G series also support NMS to help IT managers with networking maintenance and failure prevention. Finally, the series are equipped with X-Ring Pro, which can achieve ultra-high-speed recovery times of <20 ms, thus ensuring network stability. The EKI-7708G-4FPI in particular also features a wide operating temperature of -40 ~ 75°C and NEMA TS2 rating, making it ideal for use in traffic applications. The EKI-7708G-4FP/4FPI meet the EN50121-4 European railway standard requirements for emissions and railway platform/trackside deployment. Specifications Interfaces / Communications I/O Port PoE Console Port Power Connector Power 4 x 10/100/1000BASE-T/TX RJ-45 4 x SFP (mini-GBIC) port Auto-Negotiation, Full/Half Duplex Mode Auto MDI/MDI-X Connection IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X)/FX IEEE 802.3ab 1000BaseT(X) IEEE 802.3z for 1000BaseSX/LX/LHX/ZX IEEE 802.3x for Flow Control Port 1 ~ Port 4: IEEE 802.3at/af RS-232 (RJ45) 6-pin screw Terminal Block (including relay) Power Consumption Power Input Power Budget Fault Output Enclosure Protection Class Installation Dimensions (W x H x D) Metal Shell IP 30 DIN-Rail, Wall-mount 74 x 152 x 105 mm (2.91" x 5.98" x 4.13") LED Indicators System LED Port LED PWR1, PWR2, SYS, Alarm and R.M. Link / Speed / Activity / PoE Environment Operating Temperature Storage Temperature Ambient Relative Humidity Overload Current Protection Reverse Polarity Protection MTBF 12.1W @ 48VDC (System) 48 VDC (46 to 57 VDC) 53 -57 VDC is recommended for 802.3at redundant dual power input 120W 1 Relay Output Shock Freefall Vibration Traffic control Railway Trackside UL 61010-2-201 CE, CISPR 32, FCC Part 15B Class A IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-4 IEC 61000-4-5 IEC 61000-4-6 IEC 61000-4-8 IEC 61000-4-11 EN 61000-6-2 EN 61000-6-4 IEC 60068-2-27 IEC 60068-2-32 IEC 60068-2-6 NEMA TS-2 EN 50121-4 Switch Properties Switch Capacity Transmission Rate MAC Table Size Jumbo Frame Packet Buffer Size Max. IGMP Group Max. VLAN Group Industrial Ethernet Solutions All product specifications are subject t

Open the catalog to page 1

Panel Cut-out Dimensions (W x H x D): 74 x 152 x 105 mm (2.913 x 5.98 x 4.134 inch) L2 Features VLAN Arrange Port Mirroring RSPAN GARP IP Multicast Storm Control LLDP Industrial Protocol Redundancy 802.1Q Tag-based VLAN, 802.1ad QinQ VLAN Stacking 1 to 1, N to 1 Max. Mirror Session: 4 Remote Switched Port Analysis GVRP, GMRP IGMP Snooping v1/v2/v3, MLD Snooping, IGMP Immediate leave Broadcast, Multicast, Unknown unicast 802.1ab LLDP, LLDP-MED Modbus/TCP IEEE 802.1D-STP, IEEE 802.1s-MSTP, IEEE 802.1w-RSTP, X-Ring Pro, with ultra high-speed recovery time less than 20ms, ERPS(G.8032) QoS...

Open the catalog to page 2

EKI-7708G-4FP EKI-7708G-4FPI 2Pages

Catalog excerpts

All ADVANTECH catalogs and technical brochures

EKI-7708G-4FP EKI-7708G-4FPI
2Pages