AirborneM2M™ Dual Band (2.4 GHz , 5 GHz) Wi-Fi Serial Server – Embedded OEM & Carrier Board FEATURES / BENEFITS • Serial to 802.11a/b/g/n dual band (2.4 GHz, 5 GHz) • Transmit data rate: up to 65 Mbps • Wide operating temperature range: -20 to +85 °C • Open board design • USA, Canada, CE / EU approvals • Enterprise Class wireless security (WPA2-Enterprise, WPA, WEP, EAP) • AirborneM2M Management Center (AMC) device discovery, management and control application software • 2.4 / 5 GHz, 2 dBi, RP-SMA omni-directional antenna included AirborneM2M Enterprise Wi-Fi boards are built for networking equipment in an array of machine-to-machine (M2M) applications. The small compact form factor makes it easy and cost-effective to integrate into your solution. Dual-Band Wi-Fi – Model BB-ABDN-SE-DP553, Wi-Fi Serial Server board, establishes serial to wireless connections over both 2.4 GHz and 5 GHz bands. Whenever the 2.4 GHz airspace is overcrowded with competing wireless transmissions, it can be switched over to the 5 GHz band to keep data flowing. Enterprise Class Security – Security protocols are important to missioncritical wireless M2M applications. AirborneM2M multi-layered security approach addresses the requirements of Enterprise-class networks and corporate IT departments. Advanced security features include wireless security (801.11i/WPA2 Enterprise); network security (EAP authentication and certificate support); communication security (SSH functionality and fully encrypted data tunnels); and device security (multi-level encryption capability to protect configuration data). ORDERING INFORMATION MODEL NUMBER Commercial Wi-Fi Serial Server Embedded OEM board module 802.11a/b/g/n Dual band (2.4 GHz, 5 GHz) (1) RS-232/422/485 serial port * Included with product: BB-CP-SDS-NA – Power cord, USA BB-PS-WDS – 120/240 VAC, 5 VDC, 10 W, 2.1 mm power supply BB-ACH2-DBAT-DP002 – 2 DBi, 2.4/5 GHz antenna, RP-SMA Serial Cable Assembly ACCESSORIES – sold separately BB-ACH2-DBAT-DP003 – 3.8/5.5 dBi, 2.4/5 GHz, RP-SMA antenna (alternative antenna) MECHANICAL DIAGRAM Dimensions = mm [in] All product specifications are subject to change without notice. ABDN-SE-DP553_AirborneSerSvr_WiFiEmbOEMBoard_2320ds Advantech B+B SmartWorx, 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 1 (800)346-3119/Toll Free | orders@advantech-b

AirborneM2M™ Dual Band (2.4 GHz, 5 GHz) WiFi Serial Server – Embedded OEM & Carrier Board Pads can be used to connect power instead of barrel jack. On the board: E2 is on the Left. E1 is on the Right. J1 - Switchcraft RAPC722X Mating Connector - Switchcraft S760 SERIAL PORT NOTE: ANT 2 on the WiFi module is connected to J6 on the mother board using the included cable assembly. ANT 2 and J2 connectors are limited-use U.FL connectors. If you desire to move these connections, use caution as damage may occur. J2, the main antenna connection, is an RP-SMA. The WiFi module is certified for use with...

Wi-Fi Serial Server – Embedded OEM & Carrier Board TECHNOLOGY Technology Serial Modulation Technology Modulation Type Network Access Modes Environmental LED Indicators POWER SPECIFICATIONS - continued IEEE 802.11a/b/g/n compliant (1) RS-232/422/485 Serial Port DSSS, CCK, OFDM DBPSK, DQPSK, CCK, BPSK, QPSK, 16QAM, 64QAM Infrastructure (Client), Ad Hoc Operating Temperature: -20 to +80 °C Storage Temperature: -20 to +85 °C Relative Humidity: 5 to 95, non-condensing 3 Indicator LEDs (Power, LINK, COMM) Disabled, WEP 64 & 128-bit, WPA (TKIP), WPA (AES), WPA2 (AES), 802.1x (EAP) Supplicant 802.11I,...