AirborneM2M™ Dual Band (2.4 GHz, 5 GHz) Wi-Fi Ethernet Bridge/Router – Embedded OEM & Carrier Board FEATURES / BENEFITS • • • • • • • AirborneM2M Enterprise Wi-Fi boards are built for networking equipment in an array of machine to machine (M2M) applications. The small compact form factor makes it easy and cost-effective to integrate into your solution. Dual-Band Wi-Fi Model BB-ABDN-ER-DP553, Wi-Fi Ethernet Bridge/Router, establishes wireless connections over both 2.4 GHz and 5 GHz bands. Whenever the 2.4 GHz airspace is overcrowded with competing wireless transmission, it can be switched over to 5 GHz band to keep data flowing. Enterprise Class Security Security protocols are important to mission-critical wireless M2M applications. AirborneM2M multi-layered security approach addresses the requirements of Enterprise-class networks and corporate IT departments. Advanced security features include wireless security (801.11i/WPA2 Enterprise); network security (EAP authentication and certificate support); communication security (SSH functionality and fully encrypted data tunnels); and device security (multi-level encryption capability to protect configuration data). 10/100 Mbps to 802.11a/b/g/n dual band (2.4, 5 GHz) Wi-Fi Ethernet bridge/router Enterprise class wireless security (WPA2-Enterprise, WPA, WEP, EAP) Up to 65 Mbps (band dependent) Wide operating temperature range: -20 to +80 °C OEM open board, industrial design USA, Canada, EU approvals Antenna, 5VDC power supply, USA power cord included ORDERING INFORMATION MODEL NUMBER DESCRIPTION Ethernet Bridge & Router BB-ABDN-ER-DP553 * Embedded OEM board 802.11a/b/g/n Dual band (2.4 GHz, 5 GHz * Included with product: BB-CP-SDS-NA – Power cord, USA BB-PS-WDS – 120/240 VAC, 5 VDC, 10 W, 2.1 mm power supply BB-ACH2-DBAT-DP002 – 2 DBi, 2.4/5 GHz antenna, rubber duck, RP-SMA ACCESSORIES – sold separately BB-ACH0-CA-DP003-G – Airborne Ethernet Cable, RJ-45 to Hirose Connector MECHANICAL DIAGRAM Dimensions = mm [in] Antenna, 5VDC power supply, and USA power cord included. All product specifications are subject to change without notice. BB-ABDN-ER-DP553_AirborneEthBr-Rtr-OpenBd_2320ds Advantech B+B SmartWorx, 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 1 (800)346-3119/Toll Free | [email protected]

AirborneM2M™ Dual Band (2.4 GHz, 5 GHz) Wi-Fi Ethernet Bridge/Router – Embedded OEM & Carrier Board Model BB-ABDN-ER-DP553 ETHERNET PORT J8 - Hirose# DF13-7P-1.25V(50) Mating Connector - Hirose# DF13-7S-1.25C J1 - Switchcraft RAPC722X Mating Connector - Switchcraft S760 Pads can be used to connect power instead of barrel jack. On the board: E2 is on the Left. E1 is on the Right. NOTE: ANT 2 on the WiFi module is connected to J6 on the mother board using the included cable assembly. ANT 2 and J2 connectors are limited-use U.FL connectors. If you desire to move these connections, use caution as...

AirborneM2M™ Dual Band (2.4 GHz, 5 GHz) Wi-Fi Ethernet Bridge/Router – Embedded OEM & Carrier Board Model BB-ABDN-ER-DP553 SPECIFICATIONS TECHNOLOGY Technology Wired Interface Modulation Technology Modulation Type Network Access Modes Environmental LED Indicators POWER SPECIFICATIONS - continued IEEE 802.11a/b/g/n compliant 10/100 Ethernet port (bridge, router (NAT3) modes) DSSS, CCK, OFDM DBPSK, DQPSK, CCK, BPSK, QPSK, 16QAM, 64QAM Infrastructure (Client), Ad Hoc Operating Temperature: -20 to +80 °C Storage Temperature: -20 to +85 °C Relative Humidity: 5 to 95%, non-condensing 3 Indicator LEDs...