4-port RS-232/422/485 Communication Module 4-port RS-232/422/485 Virtual COM with APAX Bus RoHS COMPLIANT RoHS COMPLIANT Certification Interface Certification Interface CE, FCC class A COM 1, COM 2: RS-232/422/485 COM 3, COM 4: RS-232/422/485 Connectors 1 x 26-pin clamp-type terminal Dimensions (W x H x D) 30 x 139 x 100 mm Enclosure ABS+PC Weight 180 g Power Consumption 2 W @ 5 VDC (typical) LED Indicators TX, RX Support OS Windows / Linux (Linux Kernel 2.6.32 and newer) Operation Mode Standard COM Bus Connector PCIe Data Bits Stop Bits Parity Baud Rate Data Signals FIFO Flow Control Maximum Support 5, 6, 7, 8 1, 1.5, 2 None, even, odd 50 bps ~ 230.4 kbps RS-232: TxD, RxD, GND RS-422: Tx+, Tx-, Rx+, RXRS-485: Data+, Data256 bytes Xon/Xoff 2 pcs with one controller (on APAX-5402L) Protection ESD Protection EFT Protection Isolation Protection CE, FCC class A COM 1, COM 2: RS-232/422/485* COM 3, COM 4: RS-232/422/485* * Change Mode with the switch Connectors 1 x 26-pin clamp-type terminal Dimensions (W x H x D) 30 x 139 x 100 mm Enclosure ABS+PC Weight 180 g Power Consumption 2 W @ 24 VDC (typical) LED Indicators TX, RX Supported OS Linux Kernel 3.18 (Ubuntu 14.04) Operation Mode Virtual COM Bus Connector APAX (EtherIO) Data Bits Stop Bits Parity Baud Rate Data Signals FIFO Maximum Support 8 1, 1.5, 2 None 600bps ~ 115.2 kbps RS-232: TxD, RxD, GND RS-422: Tx+, Tx-, Rx+, RXRS-485: Data+, Data256 bytes Up to 8 pcs with one controller Protection 8KV (air), 4KV (contact) 2,000 VDC (Power Line) 2,500 VDC (between COM port and backplane) Environment Operating Temperature -10 ~ 60°C (mounted vertically) Storage Temperature -40 ~ 70°C Relative Humidity 5 ~ 95% (non-condensing) ESD Protection EFT Protection Isolation Protection 8KV (air), 4KV (contact) 2,000 VDC (Power Line) 2,500 VDC (between COM port and backplane) Environment Operating Temperature -10 ~ 60°C (mounted vertically) Storage Temperature -40 ~ 70°C Relative Humidity 5 ~ 95% RH (non-condensing) Ordering Information Ordering Information APAX-5090 4-port RS-232/422/485 Virtual COM with APAX Bus Note: APAX-5090 can only supported by EtherIO architecture (non-DSP). ex. APAX-5580+APAX-5402L Isolation 4-port RS-232/422/485 Comm. Module. Note: APAX-5490 can only be used by controllers with a PCI Express interface (ex. APAX-5580+APAX-5402L)