32-ch IDI & 16-ch PhotoMOS EtherCAT Remote I/O module 32-ch Isolated Digital Input and 32-ch Isolated Digital Output EtherCAT Remote I/O Module 16-ch IDI & 16-ch Relay EtherCAT Remote I/O module Suitable for EtherCAT networks 32-ch digital input and 16-ch PhotoMOS Relay output (Form A) 1500 VDC optical isolation for relay outputs Quick removable European type connector LED indicators for I/O status Supports EtherCAT Distributed Clock (DC) mode and SyncManager mode Two Rotary switches for up to 256 slave IDs Suitable for EtherCAT networks 32-ch digital input and 32-ch digital output with 2,500 VDC isolation Wide input voltage range (10 ~ 30 VDC) Wide output voltage range (5 ~ 40 VDC) and high output current (350 mA/ch) Quick removable European type connector LED indicators for I/O status Supports EtherCAT Distributed Clock (DC) mode and SyncManager mode Two Rotary switches for up to 256 slave IDs Suitable for EtherCAT networks 16-ch Isolated Digital Input and 16-ch Form A-type Relay Output High-voltage isolation on input channel (2,500 VDC) Quick removable European type connector LED indicators for I/O status Supports EtherCAT Distributed Clock (DC) mode and SyncManager mode Two Rotary switches for up to 256 slave IDs The AMAX-4855 is an industrial EtherCAT slave module equipped with the EtherCAT protocol. Its compact size and DINrail mount kit can install easily in a cabinet. Euro type pluggable terminal blocks and LED indicator help users to maintain and set up their system. All digital input and PhotoMOS Relay Output channels are protected by isolation circuits. The AMAX-4856 is an industrial EtherCAT slave module equipped with the EtherCAT protocol. Its compact size and DINrail mount kit can install easily in a cabinet. Euro type pluggable terminal blocks and LED indicator help users to maintain and set up their system. All digital input and digital output channels are protected by 2,500 VDC isolation circuits. The AMAX-4862 is an industrial EtherCAT slave module equipped with the EtherCAT protocol. Its compact size and DINrail mount kit can install easily in a cabinet. Euro type pluggable terminal blocks and LED indicator help users to maintain and set up their system. All digital input channels are protected by 2,500 VDC isolation circuits. Interface Data transfer medium EtherCAT Ethernet/EtherCAT cable (min. CAT 5), shielded Distance between modules Max. 100 m (100BASE-TX) Data transfer rates 100 Mbps Configuration Not required Communication Cycle Time 100us Channels Input voltage Isolation protection PhotoMOS Relay Output Channels Relay type Load Voltage Load current Peak load current Isolation protection Turn-on time Turn-off time 16 PhotoMOS SPST(Form A) 60V (AC peak or DC) 1.2A 4A @100ms(1 pulse) 1,500 VDC 1 ms typical 0.6 ms typical Dimensions Operating temperature Storage temperature Storage humidity Power supply Power Consumption 10-pin 3.81 mm terminal block * 8 (I/O) 3-pin 3.81 mm screw terminal block (power) RJ-45 * 2 (EtherCAT) 168 mm x 120 mm x 40 mm -20 ~ 60°C (-4 ~ 140°F) -40 ~ 70°C (-40 ~ 158°F) 5 ~ 95% RH (non-condensing) 10 ~ 30 VDC Typical 85mA @24V; Max. 130mA @24V Ordering Information EtherCAT Ethernet/EtherCAT cable (min. CAT 5), shielded Distance between modules Max. 100 m (100BASE-TX) Data transfer rates 100 Mbps Configuration Not required Communication Cycle Time 100us Channels Input voltage Isolation protection 32-ch IDI & 16-ch PhotoMOS EtherCAT Remote I/O module DIN RAIL A/D 100-240V 40W 24V 32 5 ~ 40 VDC 350mA/ch (sink) @ 25°C 250mA/ch (sink) @ 60°C Isolation protection 2,500 VDC Opto-isolator Response Time 100us Dimensions Operating temperature Storage temperature Storage humidity Power supply Power Consumption 10-pin 3.81 mm terminal block * 8 (I/O) 3-pin 3.81 mm screw terminal block (power) RJ-45 * 2 (EtherCAT) 168 mm x 120 mm x 40 mm -20 ~ 60°C (-4 ~ 140°F) -40 ~ 70°C (-40 ~ 158°F) 5 ~ 95% RH (non-condensing) 10 ~ 30 VDC Typical 85mA @24V; Max. 130mA @24V Ordering Information Interface Data transfer medium EtherCAT Ethernet/EtherCAT cable (min. CAT 5), shielded Distance between modules Max. 100 m (100BASE-TX) Data transfer rates 100 Mbps Configuration Not required Communication Cycle Time 100us Channels Input voltage Isolation protection Relay Output Channels Load voltage Load current Digital Input Digital Output Interfac Data transfer medium Digital Input Digital Input 32-ch Isolated Digital Input and 32-ch Isolated Digital Output EtherCAT Remote I/O Module DIN RAIL A/D 100-240V 40W 24V Channels Relay Type Contact Rating (resistive) Max. Switching Power Max. Switching Voltage Resistance Operating Time Releasing Time Life Expectancy 16 Form A 2A @ 250 VAC , 2A @ 30 VDC 500VA , 60W 270V AC, 125 VDC 30mΩ max. Max. 10ms Max. 5ms Mechanical 2 x 107 ops. at no load. Electrical 3 x 104 ops. @2A/250VAC Dimensions Operating temperature Storage temperature Storage humidity Power supply Power Consumption 10-pin 3.81 mm terminal block * 6 (I/O) 3-pin 3.81 mm screw terminal block (power) RJ-45 * 2 (EtherCAT) 168 mm x 120 mm x 40 mm -20 ~ 60°C (-4 ~ 140°F) -40 ~ 70°C (-40 ~ 158°F) 5 ~ 95% RH (non-condensing) 10 ~ 30 VDC Typical 85mA @24V; Max. 130mA @24V Ordering Information 16-ch IDI & 16-ch Relay EtherCAT Remote I/O module DIN RAIL A/D 100-240V 40W 24V Intelligent Motion Control