8-Channel, 16-Bit Isolated Analog Input EtherCAT Remote I/O Module 4-Channel, 16-Bit Isolated Analog Output EtherCAT Remote I/O Module Suitable for EtherCAT networks 8 x 16-bit analog input channels with 2,500 VDC isolation Wide common-mode voltage range (±275 V) Removable European-type connector Supports EtherCAT distributed clocks (DC) mode and SyncManager mode 2 x Rotating switches that support up to 256 slave IDs Suitable for EtherCAT networks 4 x 16-bit analog output channels with 2,500 VDC isolation Multiple voltage and current output ranges Removable European-type connector Supports EtherCAT distributed clocks (DC) mode and SyncManager mode 2 x Rotating switches that support up to 256 slave IDs AMAX-4817 is an industrial-grade remote I/O slave module equipped with the EtherCAT protocol. European-type pluggable terminal blocks facilitate module setup and maintenance, while the compact size and support for DIN-rail mounting ensure easy installation in cabinet configurations. For safe and reliable operation, all of the 8 analog input channels are protected by a 2,500 VDC isolation circuit. AMAX-4820 is an industrial-grade remote I/O slave module equipped with the EtherCAT protocol. European-type pluggable terminal blocks facilitate module setup and maintenance, while the compact size and support for DIN-rail mounting ensure easy installation in cabinet configurations. For safe and reliable operation, all of the 4 analog output channels are protected by a 2,500 VDC isolation circuit. Interface Data Transfer Medium Distance Between Modules Communication Cycle Time Data Transfer Rates EtherCAT Ethernet/EtherCAT cable (min. CAT 5), shielded Max. 100 m (100BASE-TX) 100 μs (guarantees all channel data are updated) 100 Mbps Interface EtherCAT Data Transfer Medium Ethernet/EtherCAT cable (min. CAT 5), shielded Distance Between Modules Max. 100 m (100BASE-TX) Communication Cycle Time 100 μs (guarantees all channel data are updated) Data Transfer Rates 100 Mbps Analog Input Analog Output Channels 8 Resolution 16 bits Input Voltage Range 0 ~ 10 V, ±10 V Common-Mode Voltage Range ±275 V Measurement Error < ±0.1% Isolation Protection 2,500 VDC Conversion Time 40 μs for all channels Note: Because the analog sampling rate exceeds the communication cycle time, the maximum polling rate will be limited by the communication cycle time = 10 kS/s for each channel. Dimensions Operating Temperature Storage Temperature Storage Humidity Power Supply Power Consumption 2 x 10-pin terminal block (I/O), 3.81 mm 1 x 3-pin screw terminal block (power), 3.81 mm 2 x RJ-45 (EtherCAT) 120 x 120 x 40 mm (4.72 x 4.72 x 1.57 in) -20 ~ 60 °C (-4 ~ 140 °F) -40 ~ 70 °C (-40 ~ 158 °F) 5 ~ 95% RH (non-condensing) 10 ~ 30 VDC Typical 160 mA @24 V; Max. 190 mA @24 V Output Error Isolation Protection Conversion Time 4 16 bits 0 ~ 5 V, 0 ~ 10 V, ±5 V, ±10 V 0 ~ 20 mA, 4 ~ 20 mA > 1 kΩ (voltage output) < 625 Ω (current output) < ±0.1% 2,500 VDC 40 μs for all channels General Connectors Channels Resolution Output Voltage Range Output Current Range Load 8-ch, 16-bit isolated AI EtherCAT remote I/O module DIN rail A/D 100 ~ 240 V, 40 W, 24 V Dimensions Operating Temperature Storage Temperature Storage Humidity Power Supply Power Consumption 1 x 10-pin terminal block (I/O), 3.81 mm 1 x 3-pin screw terminal block (power), 3.81 mm 2 x RJ-45 (EtherCAT) 120 x 120 x 40 mm (4.72 x 4.72 x 1.57 in) -20 ~ 60 °C (-4 ~ 140 °F) -40 ~ 70 °C (-40 ~ 158 °F) 5 ~ 95% RH (non-condensing) 10 ~ 30 VDC Typical 160 mA @24 V; Max. 190 mA @24 V 4-ch, 16-bit isolated AO EtherCAT remote I/O module DIN rail A/D 100 ~ 240 V, 40 W, 24 V Intelligent Motion Control and Machine Vision All product speci