CERTUS EVO
2Pages

CERTUS EVO MEMS GNSS/INS Certus Evo is a ground breaking GNSS aided Inertial Navigation System (INS) that provides extremely accurate position, velocity, acceleration and orientation. It offers near FOG performance combined with the reliability of MEMS sensors. Low Swap-C (Size, Weight, Power and Cost) and multiple communication interfaces make for easy integration. PERFORMANCE 0.03 ° Roll and Pitch F E AT U R E S MULTI CONSTELLATION RTK Certus Evo contains a dual frequency RTK GNSS receiver that provides up to 8mm accuracy positioning and supports all of the current and future satellite navigation systems, including GPS, GLONASS, GALILEO, BeiDou and QZSS. ADVANCED FILTER Certus Evo contains Advanced Navigation’s revolutionary sensor fusion filter. The filter is more intelligent than the typical extended kalman filter and is able to extract significantly more information from the data by making use of human inspired artificial intelligence. It was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. CALIBRATED DYNAMIC RANGING SENSORS Certus Evo contains very high performance MEMS inertial sensors. These are put through Advanced Navigation’s intensive calibration process to increase their performance further still and provide consistently accurate data over an extended temperature range of -40°C to 85°C. Advanced Navigation’s custom calibration process is the only full sensor calibration that can provide dynamic ranging, allowing the user to select a sensor range for high accuracy or high accelerations on the fly. As part of this calibration, every Certus Evo unit spends 8 hours in our specially built rotating temperature chamber. MULTI-PROTOCOLS AND INTERFACES Certus Evo features multiple interfaces including Ethernet, CAN, RS232, RS422 and GPIOs. Certus Evo supports all the industry standard protocols including NMEA 0183, NMEA 2000, TSS, PASHR, Simrad as well as a wide variety of proprietary protocols. DUAL ANTENNA HEADING Certus Evo features dual antenna moving baseline RTK. This allows it to provide highly accurate heading while both stationary and moving. It is an excellent choice for applications where magnetic heading is not usable due to interference or where additional accuracy is required. An added benefit is the ability to accurately measure vehicle slip angle. RELIABILITY Certus Evo’s precision marine grade aluminium enclosure is waterproof and dirtproof to the IP67 standard and shockproof to 2000g, allowing it to be used in the most extreme conditions. A sophisticated venting system allows the unit to measure air pressure whilst keeping water out. Its minimal size, weight and power requirements allow for easy integration into almost any system. The hardware is protected from reverse polarity, overvoltage, surges, static and short circuits on all external interfaces. The GNSS contains RAIM, which excludes both malfunctioning, and tampered satellit

EMBEDDED USER INTERFACE TIME SYNCHRONISATION Certus Evo contains a GNSS disciplined oscillator that can act as the primary time source within a distributed time system, enabling access to ultra-accurate system time using PTP or NTP network time sync. Certus Evo also has a high-accuracy 1PPS and frequency output. Certus Evo features a rich, responsive embedded web interface that provides full access to all of the device’s internal functions and data. INTERNAL DATA LOGGING Certus Evo contains 256GB internal storage, allowing the user to log up to 1 year of navigation data without a...