AMROK Tombstones
1 / 16Pages

Plain Face, Precision Grid or Dedicated Machining Cast Iron, Epoxy Mineral, Aluminum, Steel Made in the U.S.A.

RIGID LIGHTWEIGHT PRECISE AMROK EPOXY-MINERAL TOMBSTONES AMROK® TOMBSTONE ADVANTAGES MADE TO FIT YOUR MACHINING CENTER BY • Milled edge locating • Hardened and ground steel edge-locating wearpads (available upon request) • Center locating • Mounting holes to your specification AME CAN PROVIDE • Plain faces • Hole grid patterns with precision bushings and threaded inserts • Precision T-slots • Machining to your specifications AME SPECIALIZES IN • Hydraulic/pneumatic fixturing • Manual dedicated fixturing • Design and build of any type of fixture to your specifications Epoxy Mineral...

ORDERING INFORMATION PLEASE SPECIFY WHEN ORDERING A) PART NUMBER (unless you need a special configuration) B) AFTER EACH PART NUMBER SPECIFY EITHER C Casting only Base machined only with mounting holes and locating description and overall height finish with lift holes Plain machined faces complete Dedicated machining C) MATERIAL • Cast iron MACHINING TOLERANCES FOR PLAIN FACE & FULL GRID AMROK® tombstones and plates are manufactured to the highest precision and quality standards with our precision tolerances. Co-axial positioned bushings and inserts allow positioning and clamping in every...

Plain Face Tombstone Model # Dimensions to your specifications if required. CAD models available at www.ame.com. CMM report available upon request.

Plain Face Tombstone Model # AMR-C101026-16 Cast Iron Weight (lbs.) Dimensions to your specifications if required. CAD models available at www.ame.com. CMM report available upon request.

Dimensions to your specifications if required. CAD models available at www.ame.com. CMM report available upon request.

DOUBLE ANGLE Double Angle tombstones are useful when a larger surface area is needed and also provides for two-sided machining. Plain Face Tombstone Model # AMR-D080216-12 AMR-D090326-16 Cast Iron Weight (lbs.) Dimensions to your specifications if required. CAD models available at www.ame.com. CMM report available upon request.

Dimensions to your specifications if required. CAD models available at www.ame.com. CMM report available upon request.

CROSS COLUMN Cross tombstones provide minimum tool clearance to allow your work to be close to the spindle. They also give you the ability to do three-sided machining. Based on your application, corner faces can also mount parts. Cast Iron Weight (lbs.) Plain Face Tombstone Model # AMR-K03030832-20 Dimensions to your specifications if required. CAD models available at www.ame.com. CMM report available upon request.

Tombstone Model # Dimensions to your specifications if required. CAD models available at www.ame.com. CMM report available upon request.

Octagon tombstones provide for high density work holding of parts. Plain Face Tombstone Model # Cast Iron Weight (lbs.) Dimensions to your specifications if required. CAD models available at www.ame.com. CMM report available upon request.

Hexagon tombstones provide for high density workholding while still providing clearance for three sided maching. Plain Face Tombstone Model # Cast Iron Weight (lbs.) Dimensions to your specifications if required. CAD models available at www.ame.com. CMM report available upon request.

For those special applications where more surface area is required without sacrificing tool clearance. Plain Face Tombstone Model # AMR-T0628-16 AMR-T1024-16 Cast Iron Weight (lbs.) Y tombstones are ideal for three-sided machining without sacrificing tool clearance. Based on your application, corner faces could also be used to mount parts. Cast Iron Weight (lbs.) Plain Face Tombstone Model # AMR-Y041224-16 Dimensions to your specifications if required. CAD models available at www.ame.com. CMM report available upon request.

WINDOW & CONSOLES Window frame tombstones provide front and back machining of parts in both front and back. Plain Face Tombstone Model # AMR-W160324-16 AMR-W160424-16 Cast Iron Weight (lbs.) Console shown with precision bushings and threaded inserts. Consoles are used to obtain various support heights. Cast Iron Weight (lbs.) Plain Face Model # AMR-F0606-04 Dimensions to your specifications if required. CAD models available at www.ame.com. CMM report available upon request.

All risers are made to fit your specific application needs. These risers are ideal to compensate spindle clearance to raise your work piece off the table for four sided machining of your work piece. Sub plates and riser plates are built to fit your application. Dimensions to your specifications if required. CAD models available at www.ame.com. CMM report available upon request.

YOUR ONE SOURCE SOLUTION FOR MACHINE TOOL COMPONENTS ENCLOSURES HSKTOOLS XY SHIELDS WIPERS pPOWER-OFF CLAMPING DRAWBARS COMPONENTS FIXTURES WORKHOLDING CHIP CONVEYORS CHIP DISC FILTERS COMPLETE MACHINE: DESIGN & BUILD ■STEELWAYCOVERSI SERVICE & REPAIR FOR ANY MAKE AND MODEL ML ADVANCED MUL MACHINE*ENGINEERING CO. Innovative People, Products and Processes Innovation is more than a concept at AME, it's part of our culture. We continually look for innovative new ways to improve our products and services, and you'll see the results in our processes, our strategic alliances, our staff, and...