AMDISK HYDRAULIC CLAMP DISKS and CLAMP RINGS

AMDISK® CLAMP DISKS (ACD) and CLAMP RINGS (ACR) have been developed to lock connecting machine components to each other by hydraulic pressure. The simple and compact design allows these components to be used in a variety of applications. AMDISK® CLAMP DISKS and RINGS are made of a high strength Bronze piston disk on which a AMDISK® CLAMP RINGS: These components are supplied with an alloy steel housing with its own pressure port. The center hole allows for easy application with a draw-bolt or rod to provide direct axial pull or clamping force without twisting the rod. AMDISK® CLAMP RINGS are excellent...

Customer supplied bore requirements. Maximum hydraulic pressure not to exceed 4000 psi. * See Figures 4 and 5.AMDISK® CLAMP RINGS - TYPE ACR CLAMPING FORCE (Fc) = A x p x 0.9 TYPE

Typical dovetail gib design. fibuiv) Pressure port feeder hole intersecting Clamp Disk bores. Assembly Tools and Procedure ASSEMBLY INSTRUCTIONS: FOR ACD CLAMP DISKS: NOTE: Assembly Tools consists of a plunger, tapered sleeve, and centering disk. 1. Grease tapered bore of tapered sleeve and insert Amlok® CLAMP DISK into tapered sleeve with seal lip downward. 2. Center tapered sleeve on centering disk and push plunger downward to partially insert the seal lip of the Amlok® CLAMP DISK into the centering disk. Fig. 4 3. Remove tapered sleeve with protruding seal lip and insert into the greased housing...