Molded DIP Socket
2Pages

Closed Frame and Open Frame Table of Models Description: Closed Frame Socket (RDS) Mat’l: High Temp. Liquid Crystal Polymer (LCP) Index: -40°C to 260°C (-40°F to 500°F) Description: Open Frame Socket (RLS) Mat’l: High Temp. Liquid Crystal Polymer (LCP) Index: -40°C to 260°C (-40°F to 500°F) Description: Peel-A-Way Socket (KS) Material: Polyimide Film Index: -269°C to 400°C (-452°F to 752°F) • Multiple finger contact on all sockets assures maximum reliability. For more information, refer to the Peel-A-Way® DIP Sockets pages (30-31). • Tapered entry for ease of insertion. • Closed bottom sleeve for 100% anti-wicking of solder. • To fit .100/(2.54mm) pitch. • Easily customized to fit your application. Polyimide Film Options Tape Seal - add 3M to end of part number • Removable tape seal protects plated contact in harsh environments • Sealed socket will not allow dirt and other contaminants to enter socket chamber and become entrapped behind contact fingers • Spray flux without contaminating contact area Terminals: Brass - Copper Alloy (C36000) ASTM-B-16 Silicone Backed Polyimide Film, -74°C to 260°C (-100°F to 500°F) Intermittent to 371°C (700°F) Contacts: Beryllium Copper - Copper Alloy (C17200) ASTM-B-194 Solder Preform: Standard: 63Sn/37Pb Lead-free: 95.5Sn/4.0Ag/0.5Cu Plating: G - Gold over Nickel M - Matte Tin over Nickel T - Tin/Lead over Nickel Gold per ASTM-B-488 Matte Tin per ASTM545-97 Tin/Lead per MIL-P-81728 Nickel per QQ-N-290 RoHS Compliant: Body Type RoHS Compliant: RDS - Hi-Temp LCP Closed Frame Molded RLS - Hi-Temp LCP Open Frame Molded DIP Spacing 3 - .300/(7.62mm) 4 - .400/(10.16mm) 6 - .600/(15.24mm) 9 - .900/(22.86mm)* Terminal Plating RoHS Compliant: G - Gold M - Matte Tin T - Tin/Lead Terminal Type See options on next page *Open Frame only Number of Pins Closed Frame 8 - 40 Open Frame 8 - 64 (see table on next page for standard pin counts) Note: Terminals plated with Matte Tin are available only with Gold plated contacts. 5 Energy Way, West Warwick, RI 02893 USA Tel: 800.424.9850 | 401.823.5200 Fax: 401.823.8723 info@advanced.com | www.advanced.com Catalog 16A Products shown covered by patents issued and/or pending. Specifications subject

Molded DIP SocketsClosed Frame and Open Frame DIP Sockets Standard Terminals Additional standard and custom terminals available. See Terminals section or consult factory. Low Profile Solder Tail Low Profile Solder Tail Intrusive Reflow Application: SOLDER PREFORM PLATED THRU HOLE (PTH) Solder Preform Terminals Tin/Lead: Type -150 Tin/Lead: Type -151 Lead-free: Type -811 Lead-free: Type -812 BEFORE REFLOW AFTER REFLOW Solder Preform^ Dimensional Information Combines the labor of socket loading and solder application into one operation. Eliminates the use of solder paste and screening...