079/(2.00mm) Pitch Connectors

Product catalog summary

Specifications:
Terminals are made from Brass - Copper Alloy (C36000) as per ASTM-B-16. Contacts are made from Beryllium Copper (C17200) according to ASTM-B-194. Plating options include Gold over Nickel, Matte Tin over Nickel, and Tin/Lead over Nickel, with standards Gold per ASTM-B-488, Matte Tin per ASTM545-97, and Tin/Lead per MIL-P-81728. Nickel plating follows QQ-N-290 standards.

Product Configuration:
Products are identified by a code such as KMC 090 - 165 M, where the code specifies terminal plating, terminal type, body type, and RoHS compliance. Insulators are RoHS compliant and available in single (KMA), dual (KMB), and triple (KMC) row configurations. The total number of pins is calculated by multiplying the number of pins per row by the number of rows, with standard options being 10, 20, 30, 40, and 50 pins per row.

Material and Temperature Range:
Peel-A-Way® insulators are made from Polyimide Film, suitable for temperatures ranging from -269°C to 400°C (-452°F to 752°F).

Features:
The connectors are supplied in high-temperature Peel-A-Way® removable terminal carriers. They are designed in mating pairs with a .079/(2.00mm) row-to-row pitch. The terminals are screw-machined with closed-end construction to prevent solder wicking. Custom configurations are available, and the connectors provide reliable mechanical support.

Dimensional Information:
Connectors are available in single, dual, and triple row configurations with specific dimensions provided for each type. The document includes detailed measurements for standard male and female terminals.

Ordering Information:
To order, specify the terminal plating, terminal type, body type, and RoHS compliance. The document provides examples of part numbers and their configurations.

Assembly Instructions:
For Peel-A-Way® carriers, place the socket on the PC board, send it through the soldering operation, and then peel away the polyimide film carrier for solder joint visibility or leave it in place for added stability.

Catalog excerpts

.079/(2.00mm) Pitch Board to Board Connectors Peel-A-Way® Insulators Table of Models Single Row Features: Supplied in high temperature Peel-A-Way® removable terminal carrier. Male and female connectors are designed in mating pairs. .079/(2.00mm) row to row pitch. High reliability screw-machined terminals with closed-end construction for 100% anti-wicking of solder. For surface mount board to board options consult factory. Reliable mechanical support. Custom configurations available. Specifications: Terminals: Brass - Copper Alloy (C36000) ASTM-B-16 Contacts: Beryllium Copper (C17200) ASTM-B-194 Plating: G - Gold over Nickel M - Matte Tin over Nickel T - Tin/Lead over Nickel Gold per ASTM-B-488 Matte Tin per ASTM545-97 Tin/Lead per MIL-P-81728 Nickel per QQ-N-290 Dimensional Information Single Row Multiply number of rows by number of pins per row for total pin count in part number. How To Order Female Body Type - RoHS Compliant Insulators: KMS - Single Row KMD - Dual Row KMT - Triple Row KMT 090 - 85 M Total Number of Pins — (no. of pins per row x no. of rows) Std. pins per row = 10, 20, 30, 40 & 50 RoHS Compliant Pb Free Male Body Type RoHS Compliant Insulators: KMA - Single Row KMB - Dual Row KMC - Triple Row Contact Plating RoHS Compliant: G - Gold T - Tin/Lead Terminal Plating RoHS Compliant: G - Gold M - Matte Tin T - Tin/Lead — Terminal Type See options RoHS Compliant: G - Gold M - Matte Tin III Total Number of Pins (no. of pins per row x no. of rows) Std. pins per row = 10, 20, 30, 40 & 50 T - Tin/Lead Terminal Type See options 5 Energy Way, West Warwick, RI 02893 USA Tel: 800.424.9850 | 401.823.5200 Fax: 401.823.8723 [email protected] | www.advanced.com Catalog 16A Note: Terminals plated with Matte Tin are available only with Gold plated contacts. Products shown covered by patents issued and/or pending. Specifications subject to change without notice.

Open the catalog to page 1

Peel-A-Way® Insulators Standard Female Terminals Type -85 Type -176 Additional standard and custom terminals available. See Terminals section or consult factory. Board to Board Connectors Standard Male Terminals Type -165 Peel-A-Way® only Peel-A-Way® only Peel-A-Way® Removable Carriers Polyimide Film Peel away after soldering to PCB. V Order one each Male & Female to get the required “A” dim. Male Part # i*u uuuuuuuuuuuuuirx1 Solder fillets visible both sides PCB Solder fillets visible both sides for inspection and cleaning. 1. Place socket on PC board. 2. Send PC board and socket through soldering...

Open the catalog to page 2

079/(2.00mm) Pitch Connectors

079/(2.00mm) Pitch Connectors

Catalog excerpts

All Advanced Interconnections catalogs and technical brochures

Archived catalogs