video corpo

IMPAC IN 140/5 SERIES
8Pages

{{requestButtons}}

Catalog excerpts

IMPAC IN 140/5 SERIES - 1

IMPAC IN 140/5 SERIES Digital pyrometer with a spectral response of 5.14 pm for measurement of glass and quartz glass surfaces between 250 and 2500°C (482 to 4532°F). The Impac® IN 140/5 series pyrometers are digital, highly accurate pyrometers for non-contact temperature measurement of glass and quartz glass surfaces with temperature ranges between 250 and 2500°C (482 to 4532°F). The instrument is characterized by a very short response time and extremely small spot sizes. Making it applicable for fast measuring tasks and for the measurement of very small objects. The type IN 140/5-L is equipped with an optics with better field of view (optics 2-NL). The high speed version IN 140/5-H has a shorter response time of only 10 ms. Temperature Ranges 250 to 1400°C (MB 14) 300 to 1600°C (MB 16) 50 to 1500°C (MB 15) 500 to 2500°C (MB 25) Spectral Ranges 5.14 pm PRODUCT HIGHLIGHTS ■ Very short response time, min 10 ms ■ Extremely small spot sizes, min 0.9 mm ■ Focusable optics ■ Optimized through lens view finder or laser targeting light ■ Test current output ■ Built-in digital display ■ Interface RS232 / RS485 switchable TYPICAL APPLICATIONS Measurement Uncertainty < 1300°C: 0.6% oR or 2°C > 1300°C: 0.8% oR Repeatability 0.3% oR Optics 3 focusable optics: a = 100 to 128 mm a = 187 to 322 mm a = 362 to 2170 mm ■ Flat glass fabrication ■ Bulb production ■ Car glass assembly ■ Glass bending Alignment Laser targeting or through lens sighting ©2019 Advanced Energy Industri

Open the catalog to page 1
IMPAC IN 140/5 SERIES - 2

Measurement Specifications 1Whichever value is greater. The instrument must be at a constant ambient temperature for a minimum of 30 minutes. 2MB is a shortcut used for temperature range (in German: Messbereich). The determination of the technical data of this pyrometer is carried out in accordance with VDI/VDE IEC TS 62942-2, the calibration / adjustment in accordance with VDI/VDE 3511, Part 4.4.

Open the catalog to page 2
IMPAC IN 140/5 SERIES - 3

TECHNICAL DATA (CONTINUED) Pyrometer With Through Lens Viewfinder Pyrometer With Laser Targeting Light

Open the catalog to page 3
IMPAC IN 140/5 SERIES - 4

The pyrometers are available with different focusable optics. They offer the smallest possible spot size at any distance (exception: the optics of the IN 140/5-L with MB 15 and view finder is fixed adjusted). The adjustment can be done easily without additional tools with help of the "turn and clamp" mechanism (one hand). The spot sizes are shown in the following table (all distances are measured from the front of the lens). The different optics are exchangeable without recalibration of the pyrometer. For spot sizes between those in the table, values can be found by interpolation. Laser...

Open the catalog to page 4
IMPAC IN 140/5 SERIES - 5

The signal processing of series 140 pyrometers is fully digital, i.e. the detector signal is digitized immediately and digitally processed. With this technique, an extremely high accuracy and repeatability as well as very long measuring ranges are achieved. Accuracy The high accuracy is achieved by the digital linearization of the sensor output as well as the digital compensation of the ambient temperature. Temperature Range Due to the digital technique, the user can set any temperature sub range within the full temperature range. The minimum span of the sub range is 51°C. The analog...

Open the catalog to page 5
IMPAC IN 140/5 SERIES - 7

InfraWin is easy-to-use measurement and evaluation software for remote configuration of stationary, digital Impac brand pyrometers. This software allows the user to remotely adjust and control settings for one or two pyrometers from a single computer. InfraWin also allows the user to simultaneously monitor and control temperatures. ■ Display temperature data as color bars and online graphics ■ Capture downstream evaluations as tables, graphics or text files ■ Calculate the spot size for different measuring distances ■ Features UPP standard (Universal Pyrometer Protocol) Pyrometer Settings...

Open the catalog to page 7
IMPAC IN 140/5 SERIES - 8

Advanced Energy ABOUTADVANCED ENERGY Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. AE’s power solutions enable customer innovation in complex semiconductor and industrial thin film plasma manufacturing processes, demanding high and low voltage applications, and temperature-critical thermal processes. With deep applications know-how and responsive service and support across the...

Open the catalog to page 8

All ADVANCED ENERGY catalogs and technical brochures

  1. LCM brochure

    4 Pages

  2. xgen series

    56 Pages

  3. XSOLO

    8 Pages

  4. XF

    8 Pages

  5. COOLX®600

    8 Pages

  6. COOLX®1800

    12 Pages

  7. COOLX®1000

    11 Pages