General Description A heavy duty plasticised PVC film coated with a white and aggressive cross - linked solvent based rubber - resin adhesive. AT8 PVC Floor Marking Tape • Excellent conformability, particularly to uneven surfaces • Specially formulated PVC prevents lifting • Water resistant • Good abrasion resistance • UV resistant • Very aggressive, non-corrosive adhesive • Can be walked on immediately after application • Suitable for indoor and outdoor use • Can be applied by hand or machine • Colours and widths in accordance with the Sports England Guidance Notes Technical Details Typical Values Tape Thickness 0.14mm NOTE Except where indicated otherwise, the figures stated are average values and should not be regarded as MAXIMUM or MINIMUM values for specification purposes. The Company reserves the right to improve products and any change in specification will result in a re-issue of the relevant ‘Technical Data Sheet’. Customers should satisfy themselves that the tape is suitable for their requirements whether after such modifications or otherwise. Please check that you have the latest issue of the ‘Technical Data Sheet’. All slitting and length tolerances are to British Standards. Before use the customer is advised to consult the Health & Safety Data Sheet produced by the company for this product, which is available on request. STORAGE Tapes stored below the minimum recommended temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place. AFERA Association des Fabricants Europeens de Rubans Auto-Adhesifs. Self Water Extract pH Conductivity RoHS Compliant Service Temperature Application Temperature Storage Temperature Adding more to adhesive tape Advance Tapes International Limited Westmoreland Avenue Thurmaston Leicester LE4 8PH England